Filter
Top Products
06
44
En
Note
• Items that cannot be changed are indicated in gray. The items that can be selected depend on the player’s status.
• In Options, the factory default settings are indicated in bold.
Setting Options Explanation
Video Out
TV Aspect Ratio 16:9 (Widescreen) Select this when connected to a wide (16:9) TV.
4:3 (Standard) Select this when connected to a conventional TV.
4:3 Video Out Full 4:3 pictures are displayed over the entire screen.
Normal 4:3 pictures are displayed with vertical black bars along the sides. Select this when you
cannot switch the aspect ratio to 4:3 on the TV.
4:3 Video Out is only valid when TV Aspect Ratio is set to16:9 (Widescreen).
DVD 16:9 Video Out Letter Box 16:9 pictures are displayed with black bars at the top and bottom when viewing on a 4:3
screen.
Pan & Scan The picture is displayed over the entire screen, with the left and right sides of the 16:9
picture cropped. Select this to view 4:3 pictures over the entire screen. For some discs, the
picture will be displayed in the Letter Box mode even if Pan & Scan is set.
• DVD 16:9 Video Out is only valid when TV Aspect Ratio is set to 4:3 (Standard).
• DVD 16:9 Video Out is only valid when playing 16:9 pictures of DVD-Video discs. When other 16:9 pictures are played, they are output in the Letter Box
mode.
Audio Out
Output Terminal HDMI MAIN Select this to output audio signals from the HDMI OUT (MAIN) terminal.
DIGITAL AUDIO Select this to output audio signals from the DIGITAL OUT terminals.
ANALOG AUDIO Select this to output audio signals from the AUDIO OUT (7.1 ch) terminals.
• The optimum audio signals for the audio format and the player’s settings are output from the output terminal(s) set here.
• When HDMI MAIN or DIGITAL AUDIO is selected at Output Terminal, linear PCM audio signals (2 channels) are output from all terminals other than
the ones selected at Output Terminal.
• When ANALOG AUDIO is selected at Output Terminal, no audio signals are output from the HDMI OUT or DIGITAL OUT terminals.
• To listen to the device connected to the HDMI OUT (SUB) terminal, select HDMI MAIN and turn off the power of the device connected to the HDMI
OUT (MAIN) terminal.
Dolby Digital Out
* Only valid for the DIGITAL OUT
terminals.
Dolby Digital 1 Dolby Digital audio signals are output. With BD-ROMs, the secondary audio and interactive
audio are mixed for output.
Dolby Digital 2 Dolby Digital audio signals are output. With BD-ROMs, the signals are output without
mixing the secondary audio and interactive audio signals.
Dolby Digital PCM Select this when the connected AV receiver or amplifier, etc., is not compatible with Dolby
Digital audio signals. The Dolby Digital audio signals are converted into linear PCM audio
signals for output.
DTS Out
* Only valid for the DIGITAL OUT
terminals.
DTS 1 DTS Digital Surround audio signals are output. With BD-ROMs, the secondary audio and
interactive audio are mixed for output.
DTS 2 DTS Digital Surround audio signals are output. With BD-ROMs, the signals are output
without mixing the secondary audio and interactive audio signals.
DTS PCM Select this when the connected AV receiver or amplifier, etc., is not compatible with DTS
Digital Surround audio signals. The DTS Digital Surround audio signals are converted into
linear PCM audio signals for output.
AAC Out
* Only valid for the DIGITAL OUT
terminals.
AAC Select this when the connected AV receiver or amplifier, etc., is compatible with AAC audio
signals. The AAC audio signals are output.
AAC PCM Select this when the connected AV receiver or amplifier, etc., is not compatible with AAC
audio signals. The AAC audio signals are converted into linear PCM audio signals for
output.
DTS Downmix Stereo DTS-HD Master Audio signals, DTS-HD High Resolution Audio signals or DTS Digital
Surround audio signals converted to linear PCM audio signals are converted into 2-channel
(stereo) signals for output.
Lt/Rt DTS-HD Master Audio signals, DTS-HD High Resolution Audio signals or DTS Digital
Surround audio signals converted to linear PCM audio signals are converted into 2-channel
signals compatible with Dolby Surround for output (when the connected AV receiver or
amplifier, etc., is compatible with Dolby Pro Logic, the AV receiver or amplifier outputs the
linear PCM audio signals as surround audio signals).