Filter
Top Products
The Initial Setup menu
08
56
En
From the Playback Adjust screen, use the
/
buttons
to select a setting, then use the
/
buttons to adjust
it.
•
Pure Cinema
– This setting optimizes the picture for
film material when the video output is set to
progressive scan. Usually it is best set to
On
, but try
switching it
Off
if the picture appears unnatural.
•
Block NR
– Adjusts the amount of noise reduction
applied to the block noise (artifacts visible in areas of
flat color, caused by MPEG compression).
•
Mosquito NR
– Adjusts the amount of noise
reduction applied to the mosquito noise (artifacts
visible around the edge of an image, caused by
MPEG compression).
•
White Level
– Adjusts the intensity of white.
•
Chroma Level
– Adjusts how rich colors appear.
Press
ENTER
to exit the screen.
Audio settings
Audio Adjust setting
Use the Audio Adjust setting to adjust the dynamic range
of the audio output when playing DVDs with Dolby Digital
sound.
From the Audio Adjust screen, use the
/
buttons to
adjust the
Audio DRC
setting
On
or
Off
. (
Off
leaves the
dynamic range untouched;
On
‘squashes’ the dynamic
range, making it good for lower-level listening.)
Press
ENTER
to confirm and exit the screen.
Audio In
Use the Audio In settings to specify which channel(s) of
a dual mono source to record.
From the Audio In screen, use the
/
buttons to select
a setting, then use the
/
buttons to adjust it.
Playback Adjust
Off On
Off Max
Off Max
Min Max
Min Max
Pure Cinema
Block NR
Mosquito NR
White Level
Chroma Level
Basic
Disc
Video
Audio
Recording
Playback
Audio
Audio Adjust
Audio In
Audio Out
Audio DRC
Audio Adjust
Off
Basic
Disc
Video
Audio
Recording
Playback
Bilingual Rec
External Audio
Tuner Level
NICAM Select
Audio
Audio Adjust
Audio In
Audio Out
Audio In
Stereo
Normal
A/L
External Audio
NICAM
Bilingual Rec
Tuner Level
NICAM Select
DVR-230_UK.book Page 56 Friday, July 1, 2005 11:52 AM