The Initial Setup menu
105
En
14
Chapter 14
The Initial Setup menu
Using the Initial Setup menu
The Initial Setup menu is where you can set various recorder options for sound, picture,
language and so on.
Some settings can only be changed when the recorder is stopped. During playback and
recording these settings are grayed out in the Initial Setup menu.
Except for the Setup Navigator, menu screens are exited automatically after 20 minutes of
inactivity.
• Press HOME MENU and select ‘Initial Setup’.
In the table below, the default option is marked with a •.
Setting
Options Explanation
Basic
Clock Setting Auto
Set the channel that broadcasts a clock signal and
the clock will be set automatically.
Manual •
If there is no channel that broadcasts a clock signal
in your area, you can set the time and date manually.
Display
Set preferences for time and date display format.
The clock must be set in order to use timer recording.
Input Line System 525 System •
Use for NTSC or PAL-M recording.
625 System
Use for standard PAL-N recording.
See also About the input line system on page 114 for more information on this setting.
HELP Setting On •
Switches on the automatic Help screens for GUI
displays.
Off
Switches off the automatic Help screens for GUI
displays. (Press
HELP
on the remote to manually
display the Help screen.)
Setup Navigator Start
Select to start the Setup Navigator. See also
Switching on and setting up
on page 30
.
Tuner
Auto Channel
Setting
Antenna •
Select if you receive channels from an antenna. It
takes a few moments for the auto tuning to
complete.
Cable
Select if you receive channels via cable. It takes a few
moments for the auto tuning to complete.
DVR650HS_TDR_EN.book 105 ページ 2007年4月9日 月曜日 午後12時10分