Recording
05
50
En
DVD+RW and DVD-RAM discs can also be
initialized in order to erase the contents of
the disc.
Important
• Initializing a DVD-RW, DVD+RW or
DVD-RAM disc will erase everything
recorded on it. Make sure there is
nothing on the disc that you want to
keep!
• You may not be able to re-initialize a
DVD-RW disc in a different format if it
was originally initialized on an older DVD
recorder.
• Once initialized for VR mode recording,
you can’t re-initialize a DVD-R back to
Video mode.
1 Select ‘Disc Setup’ from the
Home Menu.
2 Select ‘Initialize’ > ‘Video
Mode’, ‘VR Mode’ or ‘Initialize DVD+RW’.
3 Select ‘Start’.
It takes about 30 seconds to initialize the
disc (except DVD-RAM discs, which can take
up to an hour).
DVD-RW Auto Initialize
• Default setting:
VR Mode
Initialization mode is automatically carried
out when you insert a blank DVD-RW. You
must set the desired initialization mode
before inserting a disc.
1 Select ‘Disc Setup’ from the
Home Menu.
2 Select ‘Basic’>’DVD-RW Auto
Init.’, then ‘VR Mode’ or ‘Video Mode’.
HOME
MENU
ENTER
Basic
Initialize
Finalize
Optimize HDD
Disc Setup
VR Mode
Video Mode
Initialize DVD+RW
Start
Start
Start
Initialize
ENTER
Initializing Disc
1 min left
2ch
DVD-RW
HOME
MENU
ENTER
Basic
Initialize
Finalize
Optimize HDD
Disc Setup
Input Disc Name
Basic
VR Mode
Video Mode
Lock Disc
DVD-RW Auto Init.
DVR650HS_TDR_EN.book 50 ページ 2007年4月9日 月曜日 午後12時10分