Pioneer DVR-650H-S DVD Recorder User Manual


 
Connections
17
En
02
Using other types of video
output
This recorder has standard (composite),
S-video and component video outputs. The
main difference between them is the quality
of the picture. S-video delivers a better
picture than composite video, while
component video gives better picture quality
still. The variety of outputs also gives you the
flexibility of connecting your particular
equipment using the best connection type
available.
1 Connecting using an S-video output
S-video carries the picture as separate
colour and luminance (brightness) signals.
There are two S-video outputs for connection
to TVs, monitors, VCRs or other equipment.
Use an S-video cable (not supplied) to
connect an S-VIDEO OUTPUT (1 or 2) to
an S-video input on your TV, monitor (or
other equipment).
2 Connecting using the component
video output
Component video carries the picture as two
separate colour signals, plus a luminance
(brightness) signal.
See also
Component Video Out
on page 106
for how to set up the component video
output for use with a progressive scan-
compatible TV.
Use a component video cable (not
supplied) to connect the COMPONENT
VIDEO OUT jacks to a component video
input on your TV, monitor (or other
equipment).
TV
AC IN
DIGITAL
AUDIO OUT
COAXIAL
HDMI OUT
CONTROL
IN
S-VIDEO
VIDEOAUDIO
L
R
ANTENNA
IN
OUT
S-VIDEO
VIDEOAUDIO
L
R
Y
P
B
P
R
OUTPUT 1
OUTPUT 2
COMPONENT VIDEO OUT
INPUT 1
/
AUTO START REC
INPUT 3
COMPONENT
VIDEO OUT
1
2
S-VIDEO
OUTPUT
To component video input
To S-video input
DVR650HS_TDR_EN.book 17 ページ 2007年4月9日 月曜日 午後12時10分