Filter
Top Products
Getting started
04
30
En
Chapter 4
Getting started
Switching on and setting up
When you switch the recorder on for the first
time, you can make several basic settings
using the Setup Navigator feature. This takes
you through setting the clock, the internal TV
tuner and the video output.
If you’re using the recorder for the first time,
we strongly recommend you use the Setup
Navigator before starting to use the
recorder.
Important
• Some of the Setup Navigator on-screen
displays (OSDs) in this section vary
slightly depending on the country or
region of purchase.
1 Switch on your TV and set the video
input to this recorder.
2 Switch on the recorder.
When you switch on for the first time, your
TV should display the Setup Navigator
screen (If the Setup Navigator doesn’t
appear, you can also access it from the
Initial Setup menu; see page 105).
3 Choose a language (then
press ENTER).
4 Start the Setup Navigator.
• If you don’t want to use the Setup
Navigator, press
to select
Cancel
,
then press
ENTER
to exit the Setup
Navigator.
5 Select an option then press
ENTER.
• Select
Do not set
if you want to skip
channel setup (because they have
already been set up, for example).
• You can go back to the previous screen
in the Setup Navigator by pressing
RETURN
.
• Select your country.
• Auto-tuning channels
The
Auto Scan
option automatically scans
and sets the channel presets.
STANDBY/ON
ENTER
English
Español
Language
Italiano
Português
ENTER
k
Setting
t
Line System
e
r Save
P
p
Navigator
p
Navigator
Start
Cancel
Start
Complete this setup before you
start using your recorder.
Please use the Initial Setup if you
want to make more detailed settings.
ENTER
k
Setting
Line System
e
r Save
P
p
Navigator
p
Navigator
Auto Channel Setting
English
Cable
Do not Set
Antenna
ENTER
k
Setting
Line System
e
r Save
k
Setting
t
Line System
e
r Save
P
Country Selection
Country
Mexico
Tuning
32/68
Cancel
DVR650HS_TDR_EN.book 30 ページ ２００７年４月９日 月曜日 午後１２時１０分