Pioneer DVR-540H-S DVD Recorder User Manual


 
The Initial Setup menu
14
121
En
DTS Out On •
Output a DTS signal when a DTS source is being
played.
Off
Switch off the digital output when a DTS source is
being played. Use when your connected equipment
doesn’t have a DTS decoder. In this case, use the
analog audio outputs.
96 kHz PCM Out
96 kHz
48 kHz •
Convert 96 kHz digital audio sources to 48 kHz out-
put. Use if your connected equipment doesn’t sup-
port 96 kHz sampling rate.
96 kHz
Output 96 kHz digital audio when a 96 kHz source is
being played.
MPEG Out MPEG
Output an MPEG audio signal when a source using
MPEG audio is being played.
MPEG
PCM •
Convert sources with MPEG audio to Linear PCM out-
put. Use if your connected equipment doesn’t have
an MPEG audio decoder.
Audio DRC On
Switches on Audio DRC (Dynamic Range Control).
Use when listening to Dolby Digital material at low
volume.
Off •
Switches off Audio DRC.
Audio DRC is not effective when listening via the digital output when the
Dolby Digital Out
setting is set to
Dolby
Digital
.
Language
OSD Language English •
Sets the language of the on-screen displays to
English.
available languages
Choose from the languages displayed for the on-
screen displays.
Setting
Options Explanation
DVR540H_WV_EN.book 121 ページ 2006年2月16日 木曜日 午後4時34分