Filter
Top Products
The Initial Setup menu
14
126
En
Angle Indicator On •
A camera icon appears on-screen during multi-angle
scenes on a DVD-Video disc.
Off
Nothing is indicated on-screen when a multi-angle
scene is showing.
Options
On Screen Display On •
The recorder displays operation displays (
Stop
,
Play
,
etc.) on-screen.
Off
Switches off the on-screen operation displays.
Front Panel Display On •
The time is shown in the front panel display when the
recorder is in standby.
Off
The front panel display is switched off in standby
(although it still lights dimly when setting a timer
recording).
Remote Control
Mode
Recorder 1–3
(default: Recorder 1)
If you are using more than one recorder in the same
room, set them to different IDs. This setting sets the
recorder ID; to change the remote controller ID,
press and hold
RETURN
then press
1
,
2
or
3
to set.
The remote will only control a recorder with the same
ID.
AV. Link This Recorder
Only •
Signals received through the AV input when the
recorder is in standby are not passed through to the
AV output.
Pass Through
Signals received when in standby are passed though
to the output for connected devices. (Note that dur-
ing EPG data download, the EPG data is not passed
through.)
When set to
Pass Through
, make sure to set Power Save (page 116) to
Off
.
DivX VOD Registration Code
Use to display the recorder’s DivX registration code.
See
DivX video compatibility
on page 10 and
DivX®
VOD content
on page 11.
Setting
Options Explanation
DVR540H_WV_EN.book 126 ページ ２００６年２月１６日 木曜日 午後４時３４分