Filter
Top Products
Playback
07
68
En
• If you want to play a DTS audio CD,
please first read the note on page 70.
3 Start playback.
• If you’re playing a DVD-Video or Video
CD, a disc menu may appear when you
start playback. Use the
///
buttons and
ENTER
to navigate DVD disc
menus, and the number buttons and
ENTER
for Video CD menus.
• When playing video from the HDD,
playback will automatically stop after the
end of a title is reached.
• There may be a slight pause when
playback switches from the first to the
second layer of a dual-layer disc.
• See the following sections for more
details on playing specific kinds of discs.
4 Press to stop playback.
5 When you’ve finished using the
recorder, eject the disc and switch the
recorder back into standby.
Playing DVD discs
The table below shows the basic playback
controls for DVD-Video, and recordable DVD
discs.
PLAY
STOP
Press to start playback.
If
RESUME
is displayed on-
screen, playback starts from
the place last stopped.
Press to stop playback.
You can resume playback from
the same point by pressing
PLAY
. (Press
STOP
again to
cancel the resume function.)
Pauses playback, or restarts
playback when paused.
Press to start scanning. Press
repeatedly to increase the scan-
ning speed.
Press to skip to previous/next
chapter/title. (During playback
you can also use the front panel
CH +/–
buttons.)
DVD+R/DVD+RW only:
PREV
may not always skip to
the previous title.
Except VR mode:
During play-
back, enter a chapter number
then press
ENTER
to skip
directly to that chapter within
the currently playing title.
On some discs, you can also
use the number buttons to
select numbered items in the
disc menu.
VR mode only:
During playback,
enter a title number then press
ENTER
.
All:
Press
CLEAR
to clear a
number entry and start again.
PLAY
STOP
PAUS E
PREV NEXT
AUDIO SUBTITLE
REC MODE
ANGLE
PLAY MODE
CLEAR
ENTER
DVR540H_WV_EN.book 68 ページ ２００６年２月１６日 木曜日 午後４時３４分