Filter
Top Products
55
En
Adjustments and Settings
11
English
Adjustments and Settings
Sleep Timer
When the selected time elapses, the Sleep Timer automatically
places the system into standby.
Press SLEEP to select the desired time.
• The timer starts counting.
• Each time you press SLEEP, the selection cycles as below:
• The factory default is “Off”.
NOTE
• To cancel the Sleep Timer, select “Off” by pressing SLEEP.
• Five minutes before the selected time elapses, the remaining
time appears every minute.
You can also use this menu to set the Sleep Timer.
1 Press HOME MENU.
2 Select “Sleep Timer”. ( / then ENTER)
3 Select the desired time. ( / then ENTER)
4 Press HOME MENU again to exit the menu.
AV Selection
Viewing options depend upon the current environment (e.g.,
room brightness), the type of the current TV program, or the
type of images input from external equipment. To change the
view, follow the directions below.
1 Press AV SELECTION.
• The current AV Selection mode appears.
2 Press AV SELECTION again before the displayed mode
disappears.
• For AV source, the mode cycles in this order;
STANDARD, DYNAMIC, MOVIE, GAME, PURE and
USER.
• For PC source, the mode toggles between STANDARD
and USER.
You can also use the menu to change the options.
1 Press HOME MENU.
2 Select “Picture”. ( / then ENTER)
3 Select “AV Selection”. ( / then ENTER)
4 Select the desired option. ( / then ENTER)
For AV source
For PC source
5 Press HOME MENU again to exit the menu.
NOTE
• You can also press AV SELECTION on the remote control
unit to change the viewing option.
• Selecting the DYNAMIC viewing setting causes all other
viewing options to become unavailable (grayed out).
30 60 90
120
Off
(cancel) (minutes)
AV Selection
STANDARD
DYNAMIC
MOVIE
GAME
PURE
USER
Item Description
STANDARD For a highly defined image in a normally bright
room
This selection is shared by the external input and
TV input sources.
DYNAMIC For a very sharp image with maximum contrast
This mode does not allow manual image quality
adjustment.
This selection is shared by the external input and
TV input sources.
MOVIE For movies
This selection is shared by the external input and
TV input sources.
GAME Lowers image brightness for easier viewing
This selection is shared by the external input and
TV input sources
PURE Reflects input signals as faithfully as possible
For example, you may select this option to check
image materials.
USER Allows you to customize settings as desired
You can set the mode for each input source.
Item Description
STANDARD For a highly defined image in a normally bright room
USER Allows you to customize settings as desired
You can set the mode for each input source.
PDP_PRO1140HD.book Page 55 Monday, June 5, 2006 5:22 PM