Pioneer PRO 940HD Flat Panel Television User Manual


 
10
En
Safety Precautions
02
Safety Precautions
This product has been engineered and manufactured with the
highest priority on safety. However, improper use can result in
electric shock and/or fire. To prevent injury, please observe the
following instructions when installing, operating and cleaning
the product. To ensure your safety and prolong the service life
of your product, please read the following precautions carefully
before using the product.
Read all operating instructions before operating the panel.
Keep this manual safe for future reference.
Observe all warnings on the product and in the operating
instructions.
Follow all operating instructions.
Cleaning—Unplug the power cord from the wall outlet
before cleaning the product. To clean the product, use the
supplied cleaning cloth or other soft cloth (e.g., cotton,
flannel, etc.). Do not use liquid or aerosol cleaners.
Do not use attachments unless recommended by the
manufacturer. Use of unauthorized attachments can result
in accidents.
Do not use the product near water (bathtub, washbasin,
kitchen sink, laundry area, swimming pool, in a wet or damp
basement, etc.).
Do not place the product on an unstable cart, stand, tripod
or table. Placing the product on an unstable base can cause
the product to fall, resulting in serious personal injuries as
well as damage to the panel. Use only a cart, stand, tripod,
bracket or table recommended by the manufacturer or sold
with the unit. When mounting the product on a wall, follow
the manufacturer’s instructions precisely. Use only
mounting hardware recommended by the manufacturer.
Sudden stops, excessive pushing and uneven floors can
cause a unit mounted on a cart to fall. Move the cart with
caution.
Openings in the cabinet are designed for ventilation. Do not
cover or block these vents and openings since insufficient
ventilation can cause overheating and/or shorten the life of
the panel. Do not place the product on a bed, sofa, rug or
other similar surface since material can block the vents. This
product is not designed for built-in installations. Do not
place the product in an enclosed place such as a bookcase
or rack unless properly vented.
This product must operate on a power source as stated on
the specification label. If you are not sure of the type of power
supply used in your home, consult your dealer or local power
company.
Power cord protection—The power cords must be routed
properly to prevent being stepped on or being pinched
between objects. Check entire length of all cables to guard
against pinching.
This panel contains glass elements. Sudden impacts from
dropping or hitting the panel can break the glass. If the panel
is broken, avoid contact with the glass shards.
Do not overload AC outlets or extension cords. Overloading
can cause fire or electric shock.
Never insert objects through vents or openings. High voltage
flows in the product, inserting an object can cause electrical
shock and/or short internal parts. For the same reason, do
not spill water or liquids into the products.
Do not attempt to service the product yourself. Removing
covers can expose you to high voltage and other dangerous
conditions. Request service from qualified and authorized
service personnel.
If any of the following conditions occurs, unplug the power
cord from the AC outlet and arrange for repairs with qualified
service personnel.
power cord or plug is damaged
liquid spilled or objects fallen into unit
exposed to rain or water
product fails to perform as described in the operating
instructions
Do not touch the controls other than those described in
the operating instructions. Improper adjustments can
cause damage, which often requires correction by a
qualified technician
unit dropped or damaged
abnormal appearance of picture
Replacement parts must meet or exceed specifications set
by the manufacturer. Use of unauthorized parts can result in
fire, electric shock and/or other danger.
Upon completion of service or repair work, request that the
service technician perform periodic safety checks to ensure
that the product is in proper operating condition.
When mounting the product on a wall or ceiling, install the
panel according to the method recommended by the
manufacturer.
Keep the product away from heat sources such as radiators,
heaters, stoves and other heat-generating devices (including
amplifiers).
Unplug the power cord from the wall outlet before installing
the speakers.
Never expose the screen of the Plasma Display Panel to a
strong impact. The screen may be broken, resulting in fire or
personal injury.
Do not expose the Plasma Display Panel to direct sunlight
for a long period of time. The optical characteristics of the
front protection panel changes, resulting in discoloration or
warping.
The approximate weight of each Plasma Display Panel is as
follows:
- PRO-1140HD - 34.3 kg (75.7 lbs.)
- PRO-940HD - 31.7 kg (69.9 lbs.)
(with stand)
Unpacking, carrying, and installing requires two or more
people.
PDP_PRO1140HD.book Page 10 Monday, June 5, 2006 5:22 PM