Filter
Top Products
27
En
Basic Operations
06
English
Setting MTS/SAP mode
When watching conventional TV programs, use the Multi-
channel Television Sound (MTS) function to enjoy stereo sound
and/or Secondary Audio Programs (SAP).
• Stereo broadcasts
Sports, shows, and concerts can be shown with dynamic
stereo sound.
• SAP broadcasts
MAIN sound: The normal program soundtrack (either in
mono or stereo).
SAP sound: Listen to a second language, supplementary
commentary and other information. (SAP is mono sound.)
NOTE
• Conventional TV channels: TV channels received through the
conventional VHF/UHF frequencies or conventional cable TV
channels
• When stereo sound is difficult to hear, manually switch to
MONO for clearer sound.
• Once MONO is selected, the Plasma Display sound remains
mono even if the system receives a stereo broadcast. You
must reselect STEREO to hear stereo sound again.
• Selecting MTS while the source is from an INPUT (1 to 6) or
a PC does not change the type of sound. The video source
determines the type of sound.
Press MTS to cycle through the types of sound.
NOTE
•The MTS button is disabled while the TV Guide On Screen™
system is displayed.
• In each of the sound types, the display changes according to
the broadcast signals.
When receiving STEREO sound signals
When receiving MONO + SAP sound signals
When receiving STEREO + SAP sound signals
When receiving MONO sound signals
STEREO
STEREO mode
SAP
SAP mode
MONO
MONO mode
A 125
STEREO
In STEREO mode
In SAP mode
In MONO mode
A 125
STEREO
A 125
MONO
In STEREO mode
In SAP mode
In MONO mode
A 125
MONO (SAP)
A 125
SAP (MAIN)
A 125
MONO (SAP)
In STEREO mode
In SAP mode
In MONO mode
A 125
STEREO (SAP)
A 125
SAP (STEREO)
A 125
MONO (SAP)
In STEREO mode
In SAP mode
In MONO mode
A 125
MONO
A 125
MAIN
A 125
MONO
PDP_PRO1140HD.book Page 27 Monday, June 5, 2006 5:22 PM