Pioneer PRO 940HD Flat Panel Television User Manual


 
61
En
Adjustments and Settings
11
English
FOCUS
Focus shifts the sound-source direction (sound image) upward
and produces clear sound contours.
1 Press HOME MENU.
2 Select “Sound”. ( / then ENTER)
3 Select “FOCUS”. ( / )
4 Select the desired parameter. ( / )
5 Press HOME MENU again to exit the menu.
Front Surround
Front Surround provides three-dimensional sound effects and/
or a deep, rich bass.
1 Press HOME MENU.
2 Select “Sound”. ( / then ENTER)
3 Select “Front Surround”. ( / )
4 Select the desired parameter. ( / )
5 Press HOME MENU again to exit the menu.
NOTE
(WOW) FOCUS is on and TruBass + SRS is selected
for Front Surround
trademark of SRS Labs, Inc.
WOW technology is incorporated under license from SRS
Labs, Inc.
Power Control
Power Control provides convenient power saving options.
Energy Save
There are three Energy Save modes to reduce power
consumption.
1 Press HOME MENU.
2 Select “Power Control”. ( / then ENTER)
3 Select “Energy Save”. ( / then ENTER)
4 Select “Save1”, “Save2” or “Picture Off”. ( / then
ENTER)
5 Press HOME MENU again to exit the menu.
NOTE
When the signal is coming from a PC, use the Home menu
to set this option.
No Signal off (AV mode only)
The system automatically enters Standby if no signal is
received for 15 minutes.
1 Press HOME MENU.
2 Select “Power Control”. ( / then ENTER)
3 Select “No Signal off”. ( / then ENTER)
4 Select “Enable”. ( / then ENTER)
5 Press HOME MENU again to exit the menu.
NOTE
Five minutes before the system is placed into Standby, a
message appears as each minute counts down.
The system may not enter Standby if the TV program signal
has a high video noise level.
Item Description
Off Deactivates FOCUS
On Activates FOCUS
Item Description
Off Deactivates both SRS and TruBass
SRS Reproduces highly effective three-dimensional sound
TruBass
(factory default)
Provides deep, rich bass using a new technology
TruBass + SRS Provides both TruBass and SRS effects
Item Description
Standard Maximum picture brightness; may increase glass
panel buzzing
Save1 Slightly reduced power consumption and brightness;
optimal setting for most uses
Save2 Lowest power consumption; slightly decreased
brightness
Picture Off Deactivates the screen to save power. To restore the
screen display, press any button other than VOL +/–
and MUTING.
This setting is not memorized by the system.
Item Description
Disable
(factory default)
Does not place the system into Standby
Enable Places the system into Standby if no signal is
received for 15 minutes
PDP_PRO1140HD.book Page 61 Monday, June 5, 2006 5:22 PM