Pioneer PRO 940HD Flat Panel Television User Manual


 
98
En
Useful Remote Control Features
13
CBL/SAT control buttons
When the CBL/SAT function has been preset by the remote
control’s learning function, the remote control buttons
function as shown below.
When the Mode switch is set to CBL/SAT, the cable
converter or satellite broadcast tuner connected to the
display, use the buttons shown below to operate the device
(3, 4, 5, 8 and 9 for cable converters and 1 to 7 for satellite
tuners):
Cable converters or satellite broadcast tuners made by other
manufacturers not listed in the system can be controlled
using the remote control if buttons 1 to 9 have already
learned the functions. See page 90.
1SAT MENU
Displays the satellite broadcasting menu screen
2ENTER, ///
ENTER: Activates the selected function
///: Selects items on the SAT GUIDE screen or
SAT MENU screen
3 0 – 9
Press a button (or buttons) that corresponds to the
channel that you want to watch
4CH +/
Selects a higher or lower channel
5 SOURCE
Turns the device sending the image On and Off
6 SAT GUIDE
Displays the satellite broadcasting guide screen
Set up this button with the learning function if necessary
7RETURN
When the CBL/SAT menu is displayed, restores the
immediately previous screen
8CH ENTER*
Enters the selected channel with the direct channel
selection buttons
9 CH RETURN*
Switches between the current channel and the previous
channel you were watching
* Some cable converter manufacturers do not preset CH
ENTER and CH RETURN. Set up these buttons with the
learning function if necessary.
NOTE
CABLE and SAT cannot be selected at the same time.
The color-highlighted buttons on the remote control can
learn the control signal from another device’s remote
control.
4
8
7
6
3
5
2
1
9
Mode switch
(with “CBL/SAT”
selected)
PDP_PRO1140HD.book Page 98 Monday, June 5, 2006 5:22 PM