Filter
Top Products
63
En
Adjustments and Settings
11
English
Manual image position and clock
adjustments (PC mode only)
Usually you can easily adjust the positions and clock of images
using Auto Setup. Use Manual Setup to optimize the positions
and clock of images when necessary.
1 Press HOME MENU.
2 Select “Option”. ( / then ENTER)
3 Select “Manual Setup”. ( / then ENTER)
4 Select an item to be adjusted. ( / then ENTER)
5 Perform adjustment. ( / or / )
• With “Clock” or “Phase” selected, you can change the
parameter using / .
6 Press HOME MENU again to exit the menu.
NOTE
• To restore all factory defaults, press / to select “Reset” in
step 4 then press ENTER. A confirmation screen appears.
Press / to select “Yes” then press ENTER.
Selecting a screen size manually
In single-screen mode, press SCREEN SIZE to change the size
of the screen. The Video signal determines the available screen
size options.
• The selectable screen sizes differ depending on the type of
input signal.
AV mode
NOTE
• Avoid displaying signals that do not completely fill the
screen. This may cause temporary or permanent image
retention depending on the frequency and duration.
PC mode except for XGA signals
PC mode for XGA signals
(Ex. 1024 × 768 input with PRO-1140HD)
NOTE
• In 2-screen mode, press SCREEN SIZE to change the size of
the left screen.
• For the PRO-940HD the number of panel pixels is different.
Signal processing and actual viewing conditions vary
slightly.
Manual Setup
H/V Position Adjust
Clock
Phase
Reset
0
0
Item Description
4:3 For 4:3 “standard” pictures (side bar appears on each
side)
FULL For 16:9 squeezed pictures
ZOOM For 16:9 letterbox pictures (bars may appear on the top
and bottom on some programs)
CINEMA For 14:9 letterbox pictures (bars may appear on the top
and bottom on some programs)
WIDE In this mode pictures are stretched to fill the screen,
side to side
Item Description
4:3 Fills the screen without altering the input signal aspect
ratio
FULL Full 16:9 screen display
Dot by Dot Matches input signal to the same number of screen
pixels
Item Description
4:3 Matches input signal to the same number of screen
pixels
Optimized for 1024 × 768 display
FULL1 Full 16:9 screen display
Optimized for 1024 × 768 display
FULL2 For wide signal display
Use when displaying 1360 × 768 signal resolution
PDP_PRO1140HD.book Page 63 Monday, June 5, 2006 5:22 PM