Pioneer PRO 940HD Flat Panel Television User Manual


 
29
En
Basic Operations
06
English
In 2-screen or picture-in-picture mode, press SWAP to
switch the position of the 2 screens.
The active screen (left side) is indicated by a “
symbol. The active screen’s picture and sound can be
adjusted.
In 2-screen mode, press SCREEN SIZE to change the size
of the left screen.
In picture-in-picture mode, press SHIFT to move the
position of the small screen counter-clockwise.
2 To select an input source, press the appropriate input
source button.
If watching conventional TV, press CH +/– to change the
channel.
NOTE
•The SPLIT button is disabled while the TV Guide On Screen™
system is displayed.
The multiscreen function cannot display images from the
same input source or two external input sources at the same
time. Attempting to do so causes a warning message to
appear.
•Press HOME MENU to return to single-screen viewing. The
corresponding menu appears.
When the two screens show the same analog broadcasting
coming through antenna A and B, the picture quality may
differ between the two screens.
If you select 19201080p@24 Hz for the main screen in the
SPLIT mode, video images may not display properly.
Displaying pictures in multi-screen mode for an extended
period may cause an after-image.
Freezing images
Use the following procedure to capture and freeze one frame.
1 Press FREEZE.
A still image appears on the right screen while action
continues on the left screen.
2 Press FREEZE again to cancel the function.
NOTE
Freeze is not available when watching in Split Screen.
If this function is not available, a warning message appears.
Unless another action is taken, FREEZE automatically
cancels after five minutes.
Displaying pictures in FREEZE mode for an extended period
may cause an after-image.
Moving image Still image
PDP_PRO1140HD.book Page 29 Monday, June 5, 2006 5:22 PM