Pioneer SC-35 TV Receiver User Manual


 
Controls and displays
02
17
En
STREAM DIRECT – Lights when Direct/Pure Direct is
selected (page 62).
ADV.SURROUND – Lights when one of the
Advanced Surround modes has been selected
(page 61).
STEREO – Lights when stereo listening is switched
on (page 61).
STANDARD – Lights when one of the Standard
Surround modes is switched on (page 59).
THX – Lights when one of the Home THX modes is
selected (page 60).
7 (
PHASE CONTROL
)
Lights when the Phase Control or Full Band Phase
Control
1
is switched on (page 62 and
63
).
8 Analog signal indicators
Light to indicate reducing the level of an analog
signal (page 80).
9 Tuner indicators
TUNED – Lights when a broadcast is being received.
STEREO
Lights when a stereo FM broadcast is being
received in auto stereo mode.
MONO – Lights when the mono mode is set using
MPX.
10
SOUND
Lights when any of the Midnight, Loudness or tone
controls features is selected (p age 76).
Lights when Dialog Enhancement is switched on.
11
Lights when the sound is muted (page 16).
12 Master volume level
Shows the overall volume level.
---” indicates the minimum level, and “+12dB” indicates
the maximum level.
13 Input function indicators
Light to indicate the input function you have selected.
(HMG only lights for the SC-37.)
14 Scroll indicators
Light when there are more selectable items when making
the various settings.
15 Speaker indicators
Lights to indicate the current speaker system, A and/or B
(page 79).
16
SLEEP
Lights when the receiver is in sleep mode (page 81).
17 Matrix decoding format indicators
2PRO LOGIC IIx – This lights to indicate 2 Pro
Logic II / 2 Pro Logic IIx decoding (page 59).
Neo:6
When one of the Neo:6 modes of the receiver
is on, this lights to indicate Neo:6 processing
(page 59)
.
18
S.RTRV
Lights when the Sound Retriever function is
active
(page 76)
.
19 Character display
Displays various system information.
20 Remote control mode indicator
Lights to indicate the receiver’s remote control mode
setting. (Not displayed when set to 1.) (SC-37: page 84,
SC-35: page 96)
Note
1 Full Band Phase Control is only apply to the SC-37.
SC-37_35_UXJCB.book 17 ページ 2010年3月9日 火曜日 午前9時32分