Filter
Top Products
Connections & Setup
16 Chapter 2
Connections & Setup
Chapter 2 17
Connection 3: DIRECTV HD Receiver + Analog TV/Monitor
1. Connect the satellite signal to the HD Receiver.
Connect the satellite dish antenna feed (RG-6 coaxial cable) to the SATELLITE IN jack on the HD Receiver.
2. (Optional) Connect an off-air signal to the HD Receiver.
Use a coaxial cable (usually included with an off-air antenna) to connect an off-air antenna to the AIR IN jack on the
back of your HD Receiver.
3. Connect a cable signal (if available) to the HD Receiver.
Connect the coaxial cable from your cable outlet to the CABLE IN jack on the back of your HD Receiver.
4. Connect a phone line to the HD Receiver.
Connect one end of the supplied phone cord to an RJ11-type modular telephone wall jack (the most common type of
phone jack). Connect the other end to the PHONE jack on the back of the HD Receiver.
5. Connect the video from the HD Receiver to your TV or monitor – match your TV or monitor’s input jacks:
a. Best Analog Connection: S-Video
Connect an S-Video cable (not supplied) to the S-VIDEO jack on the back of the HD Receiver. Connect the other end
of the cable to the S-Video input on the back of your monitor or TV.
– OR –
b. Good Analog Connection: Composite Video
Connect a composite video cable to VIDEO jack number 1 on the back of the HD Receiver. Connect the other end of
the cable to the composite video input on the back of your monitor or TV.
– OR –
c. Basic Analog Connection: Coaxial Cable
Connect a coaxial cable to the OUT TO TV jack on the back of the HD Receiver. Connect the other end of the cable
to the antenna input on the back of your monitor or TV.
1
2
3
4
5a
6
5b
5c
7