Filter
Top Products
66 Chapter 5
Using the Menu System
Centering the DIRECTV
®
HD Receiver’s picture
If you’re using the RGB or DVI outputs to connect the HD receiver to your
monitor, you can change the position of the HD receiver’s picture on your
monitor’s screen using the Monitor Setup option in the Installation menu.
To center the receiver’s picture on your monitor’s screen:
1. Press MENU on the remote control.
2. Highlight SYSTEM SETUP and press SELECT.
3. Highlight Installation and press SELECT.
4. Highlight Monitor Setup and press SELECT.
5. Use the left and right arrow buttons on your remote to highlight the
direction you’d like to move the picture. Press SELECT to move the picture
to the left or to the right on your monitor’s screen.
6. Press PREV when you’re nished to return to the Installation menu. Press
EXIT to exit the menu system.
Installing a new Access Card
Your DIRECTV
®
Service provider may send you a new, replacement access card.
When you receive a new card, follow these steps to continue your DIRECTV
service without interruption:
1. Press the MENU button on your remote control.
2. Highlight SYSTEM SETUP and press SELECT.
3. Highlight Installation and press SELECT.
4. Highlight New Access Card and press SELECT (the New Access Card screen
appears).
5. To start replacing your access card, highlight OK and press SELECT. On-
screen instructions tell you how to replace your old card with the new one.
Follow those instructions.
Viewing important information and a list of features
supported by your HD Receiver
The System menu allows you to view a list of important details about your HD
Receiver, as well as a list of features supported by your HD Receiver. To view
this information, use the System Information and System Features items in the
System portion of the System Setup menu.
Viewing information on automatic system upgrades
The System Upgrades menu item in the System menu provides information about
the current software on your HD Receiver, and a history of when previous
upgrades have been downloaded to your receiver. To view this information, use
the System Upgrades item in the System portion of the System Setup menu.