Runco CX-47HD Flat Panel Television User Manual


 
Controls and Functions
12 CX-47HD/CX-OPAL47/CX-65HD Installation/Operation Manual
PRE
L
IMINAR
Y
10. EXIT
Press this button to hide the OSD controls.
MENU
Press this button to access the on-screen display (OSD) controls, or to exit the
current menu and return to the previous one.
INFO
Press this button to view input signal information (source and resolution), audio format
(mono or stereo) and current time.
11. TIMER OFF Button
Press this button to set the sleep timer.
12. Aspect Ratio Selection Buttons
16:9
For 16:9 DVDs or HDTV program material.
4:3
The input signal is scaled to fit 4:3 display mode in the center of the screen.
LETTER (Letterbox/Cinema Fill)
Image in letterbox format is enlarged to fit 16:9, full-screen display and the
upper/lower portions are “blanked off.”
V WIDE (VirtualWide)
4:3 image is enlarged NON-linearly in horizontal direction to fit 16:9 full screen display.
13. Picture-In-Picture (PIP) Function Buttons
PIP
Press to change the PIP mode (picture-in-picture, picture-by-picture or off).
POSITION
Press to choose the PIP window position (top left, top right, bottom left or bottom
right corner).
SIZE
Press to choose from three PIP window sizes.
SWAP
Press to swap the main and PIP windows.
14. PIP SRC
Press to switch to a different PIP video source.
15. AUDIO 1 / AUDIO 2 / AUDIO 3
Use these buttons to select an audio “mode” (volume and equalizer preset). For more
information about audio modes, refer to
Equalizer on page 34.