Runco CX-47HD Flat Panel Television User Manual


 
CX-47HD/CX-OPAL47/CX-65HD Installation/Operation Manual 53
PRE
L
IMINAR
Y
7.1
Crystal Series LCD
Specifications
Table 7-1 lists the Crystal Series LCD specifications.
7. Specifications
Table 7-1. Crystal Series LCD Specifications
Native Resolution: 1920 x 1080
Screen Size: CX-47HD/CX-OPAL47 = 47 in. (diagonal)
CX-65HD = 65 in. (diagonal)
Screen Aspect Ratio: 16:9
Available Aspect Ratios: 4:3, Letterbox, 16:9, VirtualWide™
DTV Compatibility: 480i/p, 576i/p, 720p, 1080i, 1080p
ISF Settings: Yes
Contrast Ratio: CX-47HD/CX-OPAL47 = 3000:1
CX-65HD = 2000:1
Data/Graphics Compatibility: Refer to Table 7-2
Response Time (typical): 4 milliseconds
Vivix Processing: 3:2 or 2:2 pull down
Video/Audio Inputs: Multiple input combinations with up to
(2) Composite Video
(1) S-Video
(2) Component Video
(4) HDMI 1.3a w/HDCP
(1) RGB (15-pin D-sub)
(5) Analog Audio
(4 stereo RCA pairs + 3.5-mm stereo mini jack)
Control Inputs: (1) RS-232 (9-pin D-sub)
(1) Wired IR (3.5-mm mono mini jack)
Outputs: (1) Digital Audio (S/PDIF optical)
(1) Stereo Speakers
Audio System: 10W RMS x 2 Stereo Amplifier
Discrete IR Control: Source, power and aspect ratios
Power Requirements: 100 to 240 VAC, 50/60Hz
Power Consumption (typical): CX-47HD/CX-OPAL47 = 350 watts (1194.5 BTUs/hour);
5 watts in standby mode
CX-65HD = 640 watts (2184.3 BTUs/hour); 8 watts in
standby mode
Operating Environment: 40ºF to 95ºF (5ºC to 35ºC);
20% to 80% humidity (non-condensing);
Altitude = 9,842 feet (3,000 meters)
Dimensions: CX-47HD/CX-OPAL47 = see Figure 7-1 and Figure 7-2
CX-65HD = see Figure 7-3 and Figure 7-4