Filter
Top Products
Operation
CX-47HD/CX-OPAL47/CX-65HD Installation/Operation Manual 27
PRE
L
IMINAR
Y
Main Menu The Main Menu is the starting point for accessing all Crystal Series LCD functions.
(The ISF Calibration menu is not accessible until you enter a passcode.)
Source From the Main Menu, select Source to choose a video signal source.
The active source is indicated by an arrow (>) to its left; in this example, HDMI 1 is the
active source.
Aspect Ratio To change the aspect ratio (size and shape) of the projected image, select Aspect Ratio
from the Main Menu and press ENTER. Select the appropriate aspect ratio for the type of
program material being viewed; refer to
Table 4-1.
The currently-selected aspect ratio is indicated by an arrow (>) to its left; in this example,
16:9 is selected.
Runco CX-65HD
Source
Aspect Ratio
Picture Adjust
Audio
Timer
Setup
ISF Calibration
> HDMI 1
HDMI 2
HDMI 3
HDMI 4
Component 1
Component 2
RGB
Video 1
Video 2
> 16:9
4:3
Letterbox
VirtualWide
The aspect ratio selection persists until you change it. (It is not
saved independently for each input.)
Note