Runco SP-42 Home Theater Screen User Manual


 
Installation
Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual 15
PRE
L
IMINAR
Y
3.2
Quick Setup
Table 3-1 gives a quick overview of the CinemaWall installation process. The sections
following this one provide detailed instructions.
Installation should be performed by a qualified custom video
installation specialist.
Table 3-1. Installation Overview
Step Procedure
For Details, refer to
page...
1 Mount the CinemaWall on a wall or table stand 16
2 Connect signal sources to the CinemaWall 19
3 Connect external controller to RS-232 port (optional) 25
4 Apply power to the CinemaWall 27
5 Change the OSD language, if desired 27
6 If using the CinemaWall with a computer, adjust computer
display properties
28
7 Display calibration: adjust the following for each input;
save settings when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Sharpness
34 through 40
Note