Filter
Top Products
Serial Communications
Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual 59
PRE
L
IMINAR
Y
SFTS06 53 46 54 53 30 36 – – Sets the SIGNAL FORMAT to Type6.
SFTS07 53 46 54 53 30 37 – – Sets the SIGNAL FORMAT to Type7.
SFTS08 53 46 54 53 30 38 – – Sets the SIGNAL FORMAT to Type8.
SFTS10 53 46 54 53 31 30 – – Sets the SIGNAL FORMAT to Type10.
OPTION Menu Commands
ESVS00 45 53 56 53 30 30 – – Sets the ENERGY MODE setting to
AVERAGE.
ESVS01 45 53 56 53 30 31 – – Sets the ENERGY MODE setting to
LEVEL1 (energy saving).
ESVS02 45 53 56 53 30 32 – – Sets the ENERGY MODE setting to
LEVEL2 (fixed brightness).
ESVS03 45 53 56 53 30 33 – – Sets the ENERGY MODE setting to
LEVEL3 (long life).
ESVS04 45 53 56 53 30 34 – – Sets the ENERGY MODE setting to
AUTO.
ORBS00 4F 52 42 53 30 30 – – Turns ORBITER OFF.
ORBS01 4F 52 42 53 30 31 – – Sets ORBITER to TYPE 1.
ORBS02 4F 52 42 53 30 32 – – Sets ORBITER to TYPE 2.
ORBS03 4F 52 42 53 30 33 – – Sets ORBITER to TYPE 3.
SOFS00 53 4F 46 53 30 30 – – Turns SOFTEN OFF.
SOFS01 53 4F 46 53 30 31 – – Sets SOFTEN to 1.
SOFS02 53 4F 46 53 30 32 – – Sets SOFTEN to 2.
SOFS03 53 4F 46 53 30 33 – – Sets SOFTEN to 3.
SSTS00 53 53 54 53 30 30 – – Sets STILL IMAGE FREEZE to OFF (still
image fills screen).
SSTS01 53 53 54 53 30 31 – – Sets STILL IMAGE FREEZE to
SIDE-BY-SIDE (still image next to mov
-
ing image).
SSTS02 53 53 54 53 30 32 – – Sets STILL IMAGE FREEZE to PinP (still
image in sub-screen with moving
image).
TPH 54 50 48 000 023 Sets the hour of the present time.
Table 6-1. Serial Commands (continued)
Command Value Range
Description
ASCII HEX Minimum Maximum
Notes:
1. When making input-specific adjustments such as to image quality, screen position/size or audio
sub-volume, select the input you wish to affect before making such adjustments.
2. These settings are not stored in memory.