Runco SP-42 Home Theater Screen User Manual


 
Serial Communications
Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual 63
PRE
L
IMINAR
Y
OSDS00 4F 53 44 53 30 30 Sets OSD DISPLAY to OFF.
OSDS01 4F 53 44 53 30 31 Sets OSD DISPLAY to ON.
OSSS01 4F 53 53 53 30 31 Sets OSD SIZE to LARGE.
OSSS02 4F 53 53 53 30 32 Sets OSD SIZE to SMALL.
PTRS00 50 54 52 53 30 30 Sets sub-screen translucence to OFF
(0%).
PTRS01
PTRS02
PTRS03
PTRS04
PTRS05
PTRS06
PTRS07
PTRS08
50 54 52 53 30 31
50 54 52 53 30 32
50 54 52 53 30 33
50 54 52 53 30 34
50 54 52 53 30 35
50 54 52 53 30 36
50 54 52 53 30 37
50 54 52 53 30 38
Sets sub-screen translucence to 10%.
Sets sub-screen translucence to 20%.
Sets sub-screen translucence to 30%.
Sets sub-screen translucence to 40%.
Sets sub-screen translucence to 50%.
Sets sub-screen translucence to 60%.
Sets sub-screen translucence to 70%.
Sets sub-screen translucence to 80%.
RSL 52 53 4C 000 255 Adjusts the RED sidebar level.
SLSS00 53 4C 53 53 30 30 Sets SEAMLESS SWITCH to OFF.
SLSS01 53 4C 53 53 30 31 Sets SEAMLESS SWITCH to ON.
SL1S01
SL1S02
SL1S03
SL1S04
SL1S05
53 4C 31 53 30 31
53 4C 31 53 30 32
53 4C 31 53 30 33
53 4C 31 53 30 34
53 4C 31 53 30 35
Sets SEAMLESS SWITCH SELECT 1
to INPUT 1... INPUT 5.
SL2S01
SL2S02
SL2S03
SL2S04
SL2S05
53 4C 32 53 30 31
53 4C 32 53 30 32
53 4C 32 53 30 33
53 4C 32 53 30 34
53 4C 32 53 30 35
Sets SEAMLESS SWITCH SELECT 2
to INPUT 1... INPUT 5.
USCS00 55 53 43 53 30 30 Turns the UNDERSCAN setting OFF.
USCS01 55 53 43 53 30 31 Turns the UNDERSCAN setting ON.
Table 6-1. Serial Commands (continued)
Command Value Range
Description
ASCII HEX Minimum Maximum
Notes:
1. When making input-specific adjustments such as to image quality, screen position/size or audio
sub-volume, select the input you wish to affect before making such adjustments.
2. These settings are not stored in memory.