Filter
Top Products
Serial Communications
64 Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual
P
RELI
M
INARY
Adjustment Commands
Use these commands in place of a numeric value after a command that requires one, such as the
brightness (
BRT) command. For example, if the current Brightness setting is 128, you can use
either BRTDW0 or BRT118 to reduce the setting by 10.
DW1
DW2
DW3
DW4
DW5
DW6
DW7
DW8
DW9
44 57 31
44 57 32
44 57 33
44 57 34
44 57 35
44 57 36
44 57 37
44 57 38
44 57 39
– – Reduces adjustment value by n
(n = 1 to 9).
DW0 44 57 30 – – Reduces adjustment value by 10.
DWF 44 57 46 – – Sets the adjustment value to the mini-
mum value.
UP1
UP2
UP3
UP4
UP5
UP6
UP7
UP8
UP9
55 50 31
55 50 32
55 50 33
55 50 34
55 50 35
55 50 36
55 50 37
55 50 38
55 50 39
– –
Adds n to the adjustment value
(n = 1 to 9).
UP0 55 50 30 – – Adds 10 to the adjustment value.
UPF 55 50 46 – – Sets the adjustment value to maximum.
Table 6-1. Serial Commands (continued)
Command Value Range
Description
ASCII HEX Minimum Maximum
Notes:
1. When making input-specific adjustments such as to image quality, screen position/size or audio
sub-volume, select the input you wish to affect before making such adjustments.
2. These settings are not stored in memory.