GB
19
Presetting the Stations Automatically
☛
You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on page 13).
Your DVD-VCR contains a built-in tuner used to receive television
broadcasts.
You must preset the stations received through the tuner.
This can be done:
◆ Plug & Auto Set up (see page 13)
◆ Automatically
◆ Manually (see page 20)
You can store up to 80 stations.
1 After pressing the MENU, press the OK or
❿ .
Result: The Setup menu is displayed.
2 Press the corresponding
"
,
❷
buttons to select the Install
option.
3 Press the OK or
❿
to select this option.
Result
: The Install menu is displayed.
4 Press the corresponding
"
or
❷
buttons, until the Auto Setup
is selected.
And then press the OK or
❿
to select this option.
Result
: A message appears, indicating that any channels
already preset on your VCR will be deleted.
5 Press OK to start the auto scanning.
Result
: ◆ The Please Wait indication highlight on the
television screen.
◆ The first frequency band is scanned and the first
station found is displayed and stored.
◆ The DVD-VCR then searches for the second
station and so on.
◆ When the automatic scanning procedure has
finished, the DVD-VCR switches automatically to
programme 1.
➢ The number of stations automatically stored by the DVD-
VCR depends on the number of stations that it has found.
6 If you wish to cancel the auto scanning before the end, press the
MENU button to exit the menu.
➢ ◆ Once the auto scanning procedure has finished,
some stations may have been stored more than once;
select the stations with the best reception and delete
the ones no longer required (see page 21).
