Filter
Top Products
GB
39
Searching for a Specific Sequence
Each time you record a cassette on this DVD-VCR, an “index”
is automatically marked on the tape when recording starts.
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on
the direction selected, the indexes are numbered as follows:
➢ This DVD-VCR uses a standard indexing system
(VISS).
As a result, it will recognize any indexes marked by
other VCRs using the same
system and vice versa.
Go to [0:00:00] Stop
Use this feature when you want to search for the [0:00:00] counter
position on a cassette. Press the CLEAR button at the point on the tape
where you want to set the counter to [0:00:00].
The VCR will rewind or fast forward, searching for the [0:00:00]
counter position, and then automatically stop at that position.
1 After pressing the SEARCH, press the corresponding
#
or
❷
buttons, until the Go To [0:00:00] option is selected.
2 Press the OK or
❿
.
End Search
Use this feature when you want to search for a blank position to
record a program on a cassette.
The VCR will fast forward, searching for a blank position, and then
automatically stop at that position.If the VCR reaches the end of the
tape during end search, the tape will be ejected.
1 After pressing the SEARCH, press the corresponding
#
or
❷
buttons, until the End Search option is selected.
2 Press the OK or
❿
.
21 12
➞
etc.
Prev
Seq.
Seq. being
played
Next
Seq.
etc.
VCR