Filter
Top Products
NICAM
Selecting the Colour Mode
GB
24
VCR
VCR
Before recording or playing back a cassette, you can select the
required system standard.
Otherwise, the system automatically selects the reception
standard when you select AUTO.
➢
◆ When playing back a cassette, the standard is
automatically selected by the DVD-VCR.
◆ When you playback an NTSC-recorded tape on this DVD-
VCR make a setting on the colour system according to
your TV. If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
1 After pressing the MENU, press the OK or
❿ .
Result: The Setup menu is displayed.
2 Press the corresponding
#
,
❷
buttons to select the
User Set option.
3 Press the OK or
❿
to select this option.
Result
: The User Set menu is displayed.
4 Press the corresponding
#
or
❷
buttons, until the Colour
System option is selected.
5 Press the Ok or
❿
button to select Auto
➝
PAL
➝
SECAM
➝
MESECAM
➝
B/W.
Auto When playing back a cassette, the system standard is
automatically selected by the DVD-VCR.
B/W Black and White
6 On completion, press RETURN three time to exit the menu.
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
Colour System : Auto
NICAM : On
IPC : On
ShowView Extend : Off
User Set
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard
mono sound broadcast and you can select the desired sound.
Please refer to page 37.
1 After pressing the MENU, press the OK or
❿ .
Result
: The Setup menu is displayed.
2 Press the corresponding
#
,
❷
buttons to select the
User Set option.
3 Press the OK or
❿
to select this option.
Result
: The User Set menu is displayed.
4 Press the corresponding
#
or
❷
buttons, until the NICAM
options selected.
5 To... Press OK or
❿
, until...
Mono mode Off is displayed.
Off: Only set at this position to record
the standard mono sound during a
NICAM broadcast if the stereo
sound is distorted due to inferior
reception conditions.
NICAM mode On is displayed.
On: Normally set at this position.
6 On completion, press RETURN three times to exit the menu.
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
Colour System : Auto
NICAM : On
IPC : On
ShowView Extend : Off
User Set
On
Off
Auto
PAL
SECAM
MESECAM
B/W