Filter
Top Products
GB
44
Audio Dubbing a Pre-recorded Cassette
With the Audio Dubbing function, you erase the previously
recorded sound and replace it with a new soundtrack from:
◆ A CD, DVD
◆ A microphone connected to a sound system
◆ A cassette player
Restriction:
Audio dubbing is applicable only to the longitudinal audio track
(normal audio).
1 Connect an RCA audio cable to the appropriate output on your
sound system (cassette player for example).
2 Connect the other end of the RCA audio cable to the audio input
connectors (L, R) on the rear of your DVD-VCR.
3 Insert the pre-recorded cassette on which the audio track is to
be replaced, and press the
❿ll
to start playback.
4 Search for the Audio Dubbing (ending) point using the
❿❿
, and
set the counter to 0:00:00 by pressing INFO. and CLEAR.
5 Search back slightly beyond the Audio Dubbing start point using
the
➛➛
button.
6 Press the
❿ll
button.
Press the
❿ll
button one more time to make Still mode.
7 Press A.DUB.
Result
: Your DVD-VCR is now in the Audio dubbing Still mode.
8 On the sound system, locate the point on the cassette at which
you wish to start playback.
Example: The track that you wish to record on the cassette.
9 When you are ready:
◆ Start playback on the sound system
◆ Press the REC (
●
) on the remote control.
Result
:
The soundtrack is replaced on the pre-recorded
cassette.
10 The audio dubbing will finish when the counter reaches 0:00:00.
➢ The new sound will be recorded on the normal sound
track of the tape, and the original sound will remain on
the Hi-Fi sound track.
To hear the new sound and original sound mixed
together, press the Audio button on the remote control
until the MIX option is displayed (see page 37).
VCR
A.DUB
-0:05:23
7
RADIO ANT.
AM
FM
75
COAXIAL
AUX
IN OUT
AUDIO
VIDEO
DVD & VCR
R
L
2