Filter
Top Products
GB
45
Using the TV Buttons on the Remote Control
Your DVD-VCR remote control will work with Samsung
televisions and compatible brands.
To determine whether your television is compatible, follow the
instructions below.
1 Switch your television on.
2 Point the remote control towards the television.
3 Hold down the TV button and enter the two-figure code
corresponding to the brand of your television, by pressing the
appropriate numeric buttons.
Brand Codes Brand Codes
SAMSUNG 01 to 06 PHILIPS 02, 20, 22
AKAI 09, 23 SABA
13, 14, 22 to 24
GRUNDIG 09, 17, 21 SONY 15, 16
LOEWE 02 THOMSON 13, 14, 24
PANASONIC 08, 23 to 27 TOSHIBA
07, 16 to 19, 21
Result
:
If your television is compatible with the remote control,
it will switch off. It is now programmed to operate with
the remote control.
➢ If several codes are indicated for your television brand, try
each one in turn until you find one that works.
☛
When you change the batteries in the remote control, you
must reprogramme the code, following the same
procedure.
You can then control the television using the following buttons.
Button Function
TV STANDBY/ON
➀
Used to switch the television on and off.
TV or VCR
➁
Used to switch between the TV and VCR
modes.
INPUT SEL.
➂
Used to select an external source.
VOL + or –
➃
Used to adjust the volume of the television.
PROG/TRK
➄
Used to select the required programme.
(or)
TV MUTE
➅
Used to mute the volume of the television.
➢
The various functions will not necessarily work on all
televisions. If you encounter problems, operate the
television directly.
VCR
1
2
2
5
5
4
4
3
6