Filter
Top Products
Recording a Programme with Automatic Stop
GB
31
VCR
This function enables you to record up to nine hours (LP) of
programmes.
Your DVD-VCR stops automatically after the requested length of
time.
1 Switch on the television.
2 To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).
3 Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result: The DVD-VCR is switched on automatically.
4 Select:
◆
The station to be recorded using the
PROG ( or )
buttons
or
◆ The AV1, AV2 or AUX source using the INPUT SEL. button
for a satellite tuner or external video source
Result
: The channel number is displayed and the
programme can be seen on the television.
5 Select the recording speed by pressing the SPEED button as
many times as required (see page 29).
6 Hold the REC button (
●
) down for a while to start recording.
Result
: The record indicator appears on the television screen
and DVD-VCR display. An index is recorded on the
tape (see page 39).
7 Press the REC button (
●
) several times to increase the
recording time in:
◆ 30-minute intervals up to four hours
◆ 1-hour intervals up to nine hours
Result
: The length is displayed on the television displays.
The selected programme is recorded for the length of
time requested. At the end of that time, the DVD-
VCR stops recording automatically and power off.
8 If you wish to cancel the recording before the end, press
STANDBY/ON.
☛ If the end of the tape is reached while recording:
◆ The recording stops and power off.
☛ This function is not available in DVD recording
LENGTH 2:30
SET LENGTH :
PRESS REC
●
EJECT
RECS.MODE
STANDBY/ON
PHONES
COPY PROG
SELECT
VOL
P.SCAN
3
6
4
4
5