Filter
Top Products
GB
20
Presetting the Stations Manually
VCR
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
Auto Setup
Manual Setup
Install
TV System : G
VCR Output CH : CH 36
MANUAL TUNING
MEMORY : OK
RETURN
PR :
CH : - - -
MFT : -
DECODER : OFF
NAME : - - - -
TV STATION TABLE
SWAPPING : OK
DELETE : CLEAR RETURN
PR CH NAME DEC
1
2
3
4
5
☛ You do not need to preset the stations manually if you
have already set them automatically.
1 After pressing the MENU, press the OK or
❿ .
Result
: The Setup menu is displayed.
2 Press the corresponding
#
,
❷
buttons to select the Install
option.
3 Press the OK or
❿
to select this option.
Result
: The Install menu is displayed.
4 Press the corresponding
#
or
❷
buttons, until the Manual
Setup option is selected.
5 Press the OK or
❿
to select a Manual Setup option.
Result
: The TV STATION TABLE menu is displayed.
6 Press the
#
or
❷
buttons to select a programme number as
required.
7 Press the
❿!
button to preset the station.
Result
: The MANUAL TUNING menu is displayed.
8 Press the
➛
or
❿
buttons to start scanning channel.
Result
: The frequency band is scanned and the first station
found is displayed.
9 Press the
❷
button, until the DECODER is selected.
10 Press the
❿
button to activate or deactivate use of the decoder
for the TV station, if necessary.
11 Press the
#
or
❷
buttons until the NAME is selected.
The station name is set automatically from the broadcast signal.
12 To change the programme’s name, press the
❿!
button.
Result
: The first letter of the name flashes.
13 To... Then...
Select a character Press the
#
or
❷
button until the
in the name required character is displayed
(letters, numbers or “-” character).
Move to the next or Press the
➛
or
❿
buttons
previous character respectively.
14 If you... Then...
Wish to store the ◆ Press the
#
or
❷!
buttons until the
station displayed
MFT is selected.
◆ Press the
➛
or
❿
buttons to adjust the
picture, if necessary.
◆ Press OK to store the station
Do not wish to ◆ Press the
#
or
❷
buttons until the CH
displayed store the station is selected.
◆ Press the
➛
or
❿
buttons to go on
scanning the frequency band and
display the next station
◆ Go back to the beginning of Step 9
15 Repeat this procedure from Step 9 onwards, until all the
required stations have been stored.
16 On completion, press the RETURN button three times to exit the
menu.