Filter
Top Products
English - 17
Connecting & Setting Up
Connecting the
DVD RECORDER
Additional Connections
You can connect your DVD RECORDER to a
satellite or digital tuner.
- DVD mode
1. Connect the AV2 connector of DVD RECORDER
and VCR/Satellite receiver or digital tuner using a
SCART cable.
2. Connect the AV1 connector to the SCART AV
connector on TV.
3. Turn on the DVD RECORDER, VCR/Satellite
receiver or digital tuner and TV.
4. Set Input mode on AV2.
- TV mode
1. Press the TV/DVD button on remote control,then
“TV” appear on Front LED display. (or turn off
DVD RECORDER.)
2. You can watch programmes from a satellite or
digital tuner connected to this DVD RECORDER,
even when the DVD RECORDER is turned off.
You can connect your DVD RECORDER to the
television using the SCART cable if the appropriate
input is available on the television.
1. Connect the RF cable as shown.
2. Connect one end of the SCART cable to the AV1
socket on the rear of the DVD RECORDER.
3. Plug the other end into the appropriate connector on
the television.
4. Plug in the DVD RECORDER and TV.
5. Turn on the DVD RECORDER and TV.
6. Press the INPUT button on your TV remote control
until the Video signal from the DVD RECORDER
appears on the TV screen.
To RF IN
external device
(VCR/Satellite receiver)
To TV
RF Cable
To ANT INPUT
■
The RF cable connection of this product
sends only signals of TV.You must connect
SCART cable or Audio/Video cables to watch
a DVD from your DVD RECORDER.
■
TV mode Press the TV/DVD button on remote
control, then “TV” appear on Front LED
display (or turn off DVD RECORDER).
Then you can watch programmes received
through RF cable.
NOTE
02-R119-XEU_16-22_CONNECT 8/18/05 2:37 PM Page 17