Filter
Top Products
English - 33
System Setup
4
Press the
…†
buttons to select the desired audio
option, then press the OK or √ button.
5
Press the
…†
buttons to select the desired item,
then press the OK button.
No Disc
MOVE SELECT RETURN EXIT
Programme
Setup
Setup
Digital Output :PCM
√√
DTS : Off
√√
Dynamic Compression : On
√√
PCM
Bitstream
■
Press the RETURN or œ button to return
to the previous menu.
Press the MENU button to exit the menu.
NOTE
Digital Output
•
PCM : Select this when you have no equipment
that can decode Dolby Digital (or MPEG-
2) signal. When you play Dolby Digital (or
MPEG-2) sound track, the digital output
are converted to PCM Stereo.
•
Bitstream : Output Dolby Digital (or MPEG-2)
audio as bitstream. Select this
when your AV receiver or AV
amplifier have Dolby Digital (or
MPEG-2) Decoder.
■
Digital output setting is equally applied to
both Dolby Digital and MPEG-2 audio.
LPCM sound track is always outputted as
PCM. It has no relation with Digital
Output setting.
■
Be sure to select the correct Digital
Output or you will hear no sound or loud
noise.
NOTE
Setting up the Audio
Options
You can connect the DVD RECORDER to an external
amp or Home Theatre.
Allow you to setup the Audio device and sound status
depending on the audio system in use.
1
With the unit in Stop mode/No Disc mode,
press the MENU button.
2
Press the …† buttons to select Setup, then press
the OK or √ button.
3
Press the
…†
buttons to select Audio, then
press the OK or √ button.
Audio setup menu will be displayed.
No Disc
MOVE SELECT RETURN EXIT
Programme
Setup
Programme
Timer Record
√√
No Disc
MOVE SELECT RETURN EXIT
Programme
Setup
Setup
System
√√
Clock Set
√√
Language
√√
Audio
√√
Video
√√
Parental Control
√√
Install
√√
No Disc
MOVE SELECT RETURN EXIT
Programme
Setup
Setup
Digital Output :PCM
√√
DTS : Off
√√
Dynamic Compression : On
√√
03-R119-XEU_23-39_SETUP 8/19/05 12:40 PM Page 33