Samsung DVD-R119 DVD Recorder User Manual


 
English - 73
Recording
Start/End Time : Start and end time of the timer
recording.
Mode (Recording Mode) :
- Auto : Select when you want to set video quality
automatically. In Auto mode, the most suitable record
mode is adjusted automatically, according to
remaining time on the disc and length of the timer
recording. This function is selected only one mode in
XP, SP, LP and EP modes.
- XP (high quality) : Select when video quality is
important.
- SP (standard quality) : Select to record in standard
quality.
- LP (low quality) : Select when a long recording time
is required.
- EP (extended) : Select when a longer recording time
is required.
4
After selecting the set up value for each mode,
press the OK button to select Save, and press the
OK button again.
If the timer settings overlap;
The programmes are recorded in order of priority.
If timer recording is set for the first programme and
then again for the second programme and both
programmes overlap, the following message will
appear on the screen: “This setting is identical with
1.” The message shows that the first programme
has priority. After recording of the first programme is
complete, the second programme starts being
recorded.
To exit without saving the current setting
Press the MENU button.
To return to the previous menu
Press the RETURN button if you don’t want to set a
timer recording.
5
Turn the power off to finish the Timer Recording
setting.
will appear on the front panel. It means that a
timer recording is registered.
Timer Recording will not work when the power is on.
PDC : PDC(Programme Delivery Control) function.
- If you set this function on, you can control the
starting and ending time of recording by special
signal included in the broadcasting signal. If a TV
programme is shortened or starts earlier or later
than scheduled, this function synchronizes the
starting and ending time of recording with the actual
broadcasting time automatically.
- Set up the start-time EXACTLY according to the
published TV schedule. Otherwise the timer recording
will not operates.
- Do not select PDC unless you are sure the programme
you wish to record is broadcast with PDC.
TITLE :To label the title name, select the title and then press
the OK button. Title renaming screen appears.
See page 77 for the registration.
When you are recording at EP mode on a
DVD-RW(V mode)/-R disc, it may not
record the full 6 or 8 hours because the
unit uses the VBR(Variable Bit Rate)
ENCODING system. For example, if you
record a programme with a lot of action,
it uses a higher bit rate which in turn
consumes more disc memory.
NOTE
The timer recording time may differ from the
set time depending on disc status and
overall timer recording status (for example,
recording times overlapping, or when the
previous recording ends within 2 minutes
before the start time of the next recording.)
You can make the Timer Recording up to 12
programmes.
NOTE
05-R119-XEU_66-75_REC 8/18/05 2:31 PM Page 73