Filter
Top Products
34 - English
System Setup
2
Press the …† buttons to select Setup, then press
the OK or √ button.
3
Press the …† buttons to select Video
, then press
the
OK or √
button.
Video setup menu will be displayed.
4
Press the …† buttons to select the desired video
option
, then press the
OK or √
button.
5
Press the …†
buttons to select the desired item,
then press the
OK
button.
■
Press the RETURN or œ button to return
to the previous menu.
Press the MENU button to exit the menu.
NOTE
No Disc
MOVE SELECT RETURN EXIT
Programme
Setup
Setup
TV Aspect :
4:3 Letter Box
√√
Noise Reduction : Off
√√
Video Output :
Component
√√
4:3 Letter Box
4:3 Pan-Scan
16:9 Wide
No Disc
MOVE SELECT RETURN EXIT
Programme
Setup
Setup
TV Aspect :
4:3 Letter Box
√√
Noise Reduction : Off
√√
Video Output :
Component
√√
No Disc
MOVE SELECT RETURN EXIT
Programme
Setup
Setup
System
√√
Clock Set
√√
Language
√√
Audio
√√
Video
√√
Parental Control
√√
Install
√√
Dynamic Compression
This is only active when a Dolby Digital signal is
detected.
•
On : When Movie soundtracks are played at low
volume or from smaller speakers, the
system can apply appropriate compression
to make low-level content more intelligible
and prevent dramatic passages from
getting too loud.
•
Off : You can enjoy the movie with the standard
Dynamic Range.
■
When DTS soundtrack is played, sound
does not output from AV Audio Output.
NOTE
DTS
•
Off : Doesn’t output DTS signal. Select this
when your AV receiver or AV amplifier
does not have DTS decoder.
•
On : Outputs DTS Bitstream via digital output
when you play DTS track. Select this only
when your AV receiver (or AV amplifier)
have DTS decoder.
Setting up the Video
Display Options
1
With the unit in Stop mode/No Disc mode,
press the MENU button.
This function allows you to setup the TV screen
settings.
No Disc
MOVE SELECT RETURN EXIT
Programme
Setup
Programme
Timer Record
√√
03-R119-XEU_23-39_SETUP 8/19/05 12:40 PM Page 34