Filter
Top Products
VCR Setup
31
GB
/
PLAY
STOP
OPEN/
CLOSE
OPERATE
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
EJECT
FUNCTION
CONTROL
PROG/
REPEAT
CLEAR
RETURN
REV FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
VCR DVDAM/PM
INPUT SELECT
PAUSE/STILL
REC
VCR/DVD COMBINATION
SLOW
CH
VCR DVD
SKIP
DPSS
AUDIO
OUTPUT
ANGLE
PROG
DV- NC70
DV- NC70X
G-CODE
DV- NC70W
5 Press the number buttons (0 to 9) or
\\
\\
\ /
||
||
| until you see the
desired broadcast channel E7 (VCR CHANNEL 007) on your TV
and press ".
FINE TUNING
SKIP ON OFF
:SELECT :CHANGE
SET:ENTER MENU:EXIT
SYSTEM I B/G D/K M
PRESET CH 48
CHANNEL 007
6 For fine tuning, press
\\
\\
\ /
| |
| |
| until the broadcast channel comes in
clearly on your TV.
FINE TUNING
SKIP ON OFF
CHANNEL 007
:SELECT :CHANGE
SET:ENTER MENU:EXIT
SYSTEM I B/G D/K M
PRESET CH 48
7 To check that the broadcast channel you tuned the Product to is
VHF E7, select channel 7 using the TV tuner.
8 Select the video channel on your TV again.
• If the channel you tuned the Product to and the one on the TV
do not match, repeat steps 5 through 7.
9 Press SET. (This will set channel position 48 in memory and
return to channel position 49 for tuning.)
10 If you want to set additional channels, repeat steps 3 through 9.
11 Press VCR MENU to return to the normal screen.
• Use Auto Tuning normally for presetting.
1 Auto tuning may not be able to preset some broadcasts.
Use manual tuning to preset.
2 The same broadcast may be preset more than once.
Select the channel with the clearer broadcast.
3After auto tuning is completed, confirm the preset channels in
order.
If no sound can be heard from any of the preset channels, reset the
SYSTEM (I, B/G, D/K, M) with manual tuning.