Filter
Top Products
GB
40
About the SETUP Screen
This section describes how to specify various basic settings using the
SETUP screen. The list below shows all the items you can set and
adjust. See the following pages for details on each setup procedure.
• The setting procedures described on the following pages are
available only in STOP mode.
• The OSD (On Screen Display) screens used in this Operation
Manual are purely for the purposes of explanation. The actual
displays (set displays) may differ slightly from what is shown here.
Important!
• When you set the language to be used in the OSD, changing the
mode to “VCR” and select “LANGUAGE” in the menu screen.
See OSD Language Setting on page 37 for details.
Setup item list
Main Menu
(Example) TV MODE
41
42
44
47
48
• Specifies the setting for the type of TV connected
and the playback format for wide-screen video
material.
• Use this setting for increasing the average
volume of Dolby Digital audio when playing a
DVD.
• Use this setting for specifying either
“BITSTREAM” or “D-PCM” as the digital type.
• Use this setting for selecting languages of
subtitle, audio track and disc menu recorded on
a disc.
• Use this setting for selecting OSD languages.
• Sets or changes the parental level (1 to 8).
• Used to set or change the password used to
prevent the parental level from being changed too easily.
• See page 43 for Country Code.
TV MODE
PARENTAL [1 to 8 (ON)/OFF]/Selecting the Country Code
AUDIO
DISC LANGUAGE
OSD LANGUAGE SETUP
AUDIO
SUB TITLE
MENU
ENGLISH
FRENCH
GERMAN
ITALIAN
SPANISH
CHINESE
SWEDISH
DUTCH
OTHER
ENGLISH
FRANÇAIS
ESPAÑOL
Languages you
can select are
same as above.
Languages you
can select are
same as above.
4 : 3
16 : 9
LB
PS
4 : 3
COMPRESSION [ON/OFF]
DIGITAL
BITSTREAM
D-PCM
MPEG
CINEMA VOICE[ON/OFF]
BITSTREAM
PCM
DVD Setup
• Numbers in refer to the pages where the setting
procedures are described.
4
:
3
16
:
9
LB
4
:
3
PS
TV MODE
ENTER
RETURN
SELECT
ENTER