Filter
Top Products
GB
72
Cancelling Timer Programmes
Perform the following procedure to cancel timer programmes that
have already been set.
Preparation
• Press OPERATE. Then move the VCR/DVD CHANGE Switch to
VCR and select the video channel on the TV.
1 Press VCR MENU. (If the “ ” indicator on the VCR Front Panel
display is lit, cancel the timer standby mode with
TIMER ON/OFF
and then turn on the power.)
2 Select “TIMER” with ' / " and then press SET to confirm .
MODE
MENU
SET:ENTER MENU:EXIT
CHANNEL PRESET
:SELECT
CLOCK
LANGUAGE
TIMER
G-CODE
3 The screen for confirming programmes that have been set will
appear.
• Select the programme you wish to cancel with ' / ".
(The selected programme will appear highlighted.)
DATE PR START STOP
--/-- -- -:-- -:-- --
--/-- -- -:-- -:-- --
1/2
2/2
PMPM
--/-- -- -:-- -:-- --
15/12 48 12:00 12:30 SP
:SELECT
SET:ENTER MENU:EXIT
4 Double-check that it is the programme you wish to cancel, and
press CLEAR. It will be cleared on the screen.
DATE PR START STOP
--/-- -- -:-- -:-- --
--/-- -- -:-- -:-- --
--/-- -- -:-- -:-- --
--/-- -- -:-- -:-- --
1/2 2/2
:SELECT
SET:ENTER MENU:EXIT
5 Press VCR MENU to return to the normal screen.
• If there are still some programmes to be set, press TIMER
ON/OFF to enter the Timer Standby mode.
Recording with the Timer
/
PLAY
STOP
OPEN/
CLOSE
OPERATE
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
EJECT
FUNCTION
CONTROL
PROG/
REPEAT
CLEAR
RETURN
REV FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
VCR DVDAM/PM
INPUT SELECT
PAUSE/STILL
REC
VCR/DVD COMBINATION
SLOW
CH
VCR DVD
SKIP
DPSS
AUDIO
OUTPUT
ANGLE
PROG
DV- NC70
DV- NC70X
G-CODE
DV- NC70W