Filter
Top Products
GB
68
Recording with the Timer
The timer can be set manually for automatic recording of up to 8
events over a 365 day period.
Preparation
• Load the cassette, ensuring the erasure protection hole is covered.
The Product power will automatically turn on.
• Check that the clock is displaying the correct time. (See “Setting the
Clock” on page 35.)
• Be sure that the colour mode is set to “AUTO”. (See “COLOUR” on
page 55.)
1 Press VCR MENU. Then select “TIMER” with ' / " and press
SET.
MODE
MENU
SET:ENTER MENU:EXIT
CHANNEL PRESET
:SELECT
CLOCK
LANGUAGE
TIMER
G-CODE
2 Select the timer position with ' / " and press SET.
• If the timer positions 1 to 4 have already been set, the screen
changes to 2/2 (timer positions 5 to 8).
DATE PR START STOP
--/-- -- -:-- -:-- --
--/-- -- -:-- -:-- --
--/-- -- -:-- -:-- --
--/-- -- -:-- -:-- --
1/2
:SELECT
SET:ENTER MENU:EXIT
2/2
3 Set the date for timer recording with the number buttons (0 to 9)
or ' / " on the Remote and press
||
||
|.
•
First set the “day” digits and then “month”. If there is only one
“day” or one “month” digit, enter a 0 first.
DATE PR START STOP
--/-- -- -:-- -:-- --
--/-- -- -:-- -:-- --
1/2
15/12 -- -:-- -:-- SP
--/-- -- -:-- -:-- --
:SELECT :CHANGE
SET:ENTER MENU:EXIT
DATE :DAY/MONTH
“SP” will be displayed
automatically.
/
PLAY
STOP
OPEN/
CLOSE
OPERATE
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
EJECT
FUNCTION
CONTROL
PROG/
REPEAT
CLEAR
RETURN
REV FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
VCR DVDAM/PM
INPUT SELECT
PAUSE/STILL
REC
VCR/DVD COMBINATION
SLOW
CH
VCR DVD
SKIP
DPSS
AUDIO
OUTPUT
ANGLE
PROG
DV- NC70
DV- NC70X
G-CODE
DV- NC70W
For DV-NC70 and DV-NC70X model:
Press PROG on the Remote to enter the Timer setting screen.