Sony BDP-S350 Blu-ray Player User Manual


 
NetworkSettings
These items are necessary when you connect
to the Internet via a network cable. Enter the
respective (alphanumeric) values for your
broadband router or Wireless LAN router.
The itelns that need to be set may differ,
depending on the Internet service provider or
the router. For details, refer to the instruction
lnanuals that have been provided by your
Internet service provider or supplied with the
router.
1
2
3
4
5
6
Select"lnternetSettings"in"Network
Settings,"andpressENTER. 7
Select"IPAddressAcquisition,"and 8
pressENTER.
Selectanitem andpressENTER.
Select this when DHCP
(Dynamic Host
Configuration Protocol)
server settings are
available fi'om your
Internet service
provider. The network
settings necessary for
the player will be
assigned automatically.
Set the IP address
manually according to
your network
environment.
Use DHCP
Use Static IP
Address
When you select "Use DHCP"
If you set "DNS Server Auto
Acquisition" to "Off." setthe lbllowing
item:
- DNS Server (Primary)/DNS Server
(Secondary)
When you select "Use Static IP
Address"
Set the following items:
- IP Address
- Subnet Mask
- Default Gateway
-DNS Server (Primary)/DNS Server
(Secondary)
9
10
When you sel the "DNS Server (Primary)"/
"DNSServer(Secondary)"addresses
manually, enter the"DNSServer(Primary)"
address. Otherwise, the"InlernetSeltings"
will beset incorrectly.
Ifyour ISPhas aspecificproxyserver
setting, select "Proxy Settings"using
't'/_, and press ENTER.
The "Proxy Settings" display appears.
If the proxy server does not have a
specific setting, go to step 8.
Set "Use of Proxy Server" to "On."
Select"Proxy Server" and"Port," and
enterthe settings.
To enter the proxy server, see "To enter
characters" (page 51).
PressRETURN.
Select"NetworkDiagnostic"using'l_/
,!,, andpressENTER.
Select "Start," and pressENTER.
Checkthat the message"Network
connectionsare correct." appears.
The setup is finished. Ifthe message does
not appear, follow the on-screen
n-lessages.
50