Filter
Top Products
Check the connection to your TV (page 14)
and switch the input selector on your TV so
that the signal fi'om the player appears on
the TV screen.
When playing a double-layer DVD, the
video and audio may be momentarily
interrupted at the point where the layers
switch.
Nopictureappearswhenthevideooutput
resolutionselectedin"OutputVideo
Format"is incorrect.
Press • on tile player for more than 10
seconds to reset the video output resolution
to the lowest resolution.
Thepicturedoesnotfill thescreen,even
thoughtheaspectratioissetin"DVD
AspectRatio"under"Video Settings."
i,Ii,. Tile aspect ratio of the disc is fixed on your
DVD (page 42).
Videosignalsarenotoutputfromthe
jacks,otherthanfromtheHDMIOUTjack,
whenconnectingthe HDMIOUTjackand
othervideooutputjacksatthesametime.
Set "Output Video Format" to "Component
Video" in the "Video Settings" setup
(page 42).
Thedarkareaofthepictureistoodark/the
brightareaistoobrightorunnatural.
_1_ Set "Picture Quality Mode" to "Standard"
(default) (see "Ac!justing pictures and
sound for videos" on page 34).
Thepictureisnotoutputcorrectly.
Check the "Output Video Format" settings
in the "Video Settings" setup (page 42).
No
BD-ROMpictureappears.
Check the "BD-ROM 1080/24p Output"
setting in the "Video Settings" setup
(page 43).
See also "Connecting to an HDMI jack"
(page 20) when connecting equipment using
the HDMI cable.
Thereisnosound.
Check that all the connecting cables are
securely connected.
Check whether the connecting cables are
damaged.
Check the connection to your AV amplifier
(receiver) (page 19) and switch the input
selector on your AV amplifier (receiver) so
that the audio signals of the player are
output from your AV amplifier (receiver).
i,Ii,. The player is in scan mode.
If the audio signal does not come through
the DIGITAL OUT (OPTICAL/
COAXIAL)iHDMI OUT jack, check the
audio settings (page 44).
Thesoundis notoutputcorrectly.
Check the "Audio Output Priority" setting
in the "Audio Settings" setup (page 44).
Thesoundvolumeis low.
The sound volume is low on some BDs or
DVDs.
Try setting "Audio DRC" to "TV Mode" in
the "Audio Settings" setup (page 45).
Set "Audio ATT" to "Oft _' in the "Audio
Settings" setup (page 45).
TheHDAudio(DolbydigitalPlus,Dolhy
TrueHD,DTS-HDHighResolutionAudio,
andDTS-HDMasterAudio)isnotoutput
bybitstream.
Set "BD Audio Setting" to "Direct" in the
"Audio Settings" setup (page 44).
Check that the connected AV amplifier
(receiver) is compatible with each HD
Audio format.
Theinteractiveaudioisnotoutput.
Set "BD Audio Setting" to "Mix" in the
"Audio Settings" setup (page 44).
54