Filter
Top Products
Audio OutputSignals
The audio output differs as follows, depending o13the source, output jack, and the selected
settings,
LPCM 2ch
LPCM 5. Ich
LPCM 7. Ich
LPCM 5.1ch .5
LPCM 7.1 ch _'5
LPCM 7. Ich.5
LPCM 5. Ich_5
LPCM 5.1 ch''5
(DTS core)
LPCM 5.1ch .5
(DTS core)
LPCM 2ch
i iiaiDo,,,,D,g, al
DTS
I LpCM
DTS
LPCM 2ch LPCM 2ch LPCM 2ch 2ch
LPCM 2ch LPCM 2ch LPCM 2ch 2ch
LPCM 2ch LPCM 2ch LPCM 2ch 2ch
LPCM 2ch Dolby Digital/ LPCM 2ch 2ch
LPCM 2ch '6
LPCM 2ch Dolby Digital/ LPCM 9ch 2ch
LPCM 2ch _'6
Dolby Digital/
LPCM 2ch LP(M 2ch"(' LPCM 2ch 2ch
DTS/
LPCM 2ch LPCM 2ch '6 LPCM 2ch 2ch
LPCM 2ch DTS/ LPCM ?ch 2ch
LPCM 2ch ''('
DTS/
LPCM 2ch LPCM 2ch*(' LPCM 2ch 2ch
LPCM 2ch LP(M 2ch LPCM 2ch 2ch
LPCM 2ch Dolby Digital LPCM 2ch 2ch
LPCM 2ch DTS LPCM 2ch 2ch
LPCM 2ch LP(M 2ch LPCM 2ch 2ch
LPCM 2ch DTS LPCM 2ch 2ch
*1
*2
*3
*4
*5
When "Audio Output Priority" is set to "Stereo
Analog," LPCM 2ch signals are outpm from
each jack.
When "Audio Output Priority" is sel to "HDMI"
or "Coaxial/Optical," LPCM 2ch signals are
oulput l'rol:q jacks olher thau lhe selected jack.
Auto: when "Audio (HDMI)" is sel to "Amo" in
the "Audio Settings" setup (page 44).
2ch PCM: when "Audio (HDMI)" is set Io "2oh
PCM" in the "Audio Seltings" setup (page 44).
Bitslream: when "Dolby Digital" is set lo
"Dolby Digital" or "DTS" is set to "DTS" in the
"Audio Settings" setup (page 44).
When "BD Audio Selting" is set Io "Direct,"
audio recorded by the source is output by
bitstream. However, lhis audio may be output as
follows depending on the audio lbrmats
supported by the AV amplifier (receiver).
- When lhe AV amplifier (receiver) does not
support HD Audio (Dolby Digital Plus, Dolby
TrueHD, DTS-HD High Resolution Audio and
DTS-HD Master Audio) but supports Multi-ch
LPCM, up to LPCM 7.1ch is output.
- Wheu the AV amplifier (receiver) does not
support HD Audio or Mulfi-ch LPCM but
supports Dolby Digital/DTS, a Dolby Digital
or DTS bitstream is output.
- Wheu the AV amplifier (receiver) does not
support HD Audio, Multi-oh LPCM or Dolby
Digital/DTS, LPCM 2ch is output.
'.'6 The 2-channel or less-channel primary/
secondar, audio signals are outpul as LPCM 2ch
siguals.
O
When OUtl)Uttmg 480i/480p video signals Li"omlhe
HDMI OUT jack, Dolby TrueHD and DTS-HD
Master Audio are output as LPCM, Dolby Digital,
or DTS bitstream siguals even if "BD Audio
Seuiug" is sel Io "Direct" in _he "Audio Settings"
setup (page 44).
62