Filter
Top Products
Thereisnopictureor nosoundwhen
connectedto theHDIVIIOUTjack.
Try tile following: @Turn the player off
and on again. @Turn the connected
equipment off and on again. @Disconnect
and then reconnect the HDMI cable.
Thereisnopictureorpicturenoise
appearswhenconnectedtotheHDIVllOUT
jack.
Tile HDM] OUT jack is connected to a DVI
device that does not support copyright
protection technology.
If the HDMI OUT jack is used for video
output, changing the video output
resolution may solve the problem
(page 42).
Nosoundisoutputfromthe HDMIOUT
jack.
•'_ Tile HDM] OUT jack is connected to a DVI
device (DVI jacks do not accept audio
signals).
Thesoundis notoutputcorrectlywhen
connectedto theHDMIOUTjack.
The device connected to tile HDMI OUT
jack does not support the audio format of
the player. Check the audio settings
(page 44).
Thedisplaylanguageonthescreen
switchesautomaticallywhenconnectedto
theHDMIOUTjack.
When "Control for HDMI" is set to "On"
(page 49), the display language on the
screen automatically switches according to
the language setting of the connected TV (if
you change the setting on your TV, etc.).
The "Control for HDII" functiondoesnot
work(BRAVIASync).
Check that tile AC power cord of tile
connected component is securely
connected.
If the HDMI indicator does not appear in
the front panel display, check the HDMI
connection (page 15, 20).
Set "Control for HDMI" to "On" (page 49).
Make sure that the connected component is
compatible with the "Control for HDMI"
function. For details, refer to the operating
instructions supplied with the component.
Check the connected component's setting
for the "Control for HDMF' function. For
details, refer to the operating instructions
supplied with the component.
If you change the HDMI connection, turn
the player off and on again.
If power failure occurs, set "Control for
HDMI" to "Off," then set "Control for
HDMI" to "On" (page 49).
For details on the "Control for HDMI"
function, see "About the BRAVIA Sync
features (for HDMI connections only)"
(page 16).
If you connect the player to a TV through an
AV amplifier (receiver) that is not
compatible with the "Control for HDMI"
function, you may be unable to control the
TV from the player.
Theexternalmemoryisnotrecognized.
Try the following: @Turn tile player off.
@Align the • mark of the EXT slot with
the • mark on the external memory, and
insert the external memory (page 23).
@Turn the player on. @Check that the
EXT indicator lights up in the front panel
display.
Bonuscontentsor otherdatathatare
containedina BD-ROMcannotheplayed.
Try tile following: @Remove tile disc.
@Turn the player off. @Remove and re-
insert the external memory (page 23).
@Turn the player on. @Check that the
EXT indicator lights up in the front panel
display. @Insert the BD-ROM with
BonusView.
A messageindicatingthatthelocal
storagedoesnothaveenoughspace
appearsonthescreen.
Delete unnecessary data in tile external
memory (page 33).
,_continued 55
==.