Filter
Top Products
26
Location and Function of Parts
Chapter 1 Overview
B Analog video/audio signal output section
a
aa
a VIDEO OUT connectors (BNC type)
There are the following VIDEO OUT connectors for
outputting analog video signals:
• Y/CPST
• R
−Y/C/CPST
• B
−Y/CPST (SUPER)
The signals output from these connectors depend on the
setting of the VIDEO OUTPUT menu item (see page 75).
The setting is indicated by the VIDEO indicators in the
OUTPUT signal display section on the front panel.
The analog video signals that can be output from these
connectors are as follows.
When COMPOSITE is selected:
When the CHARA. DISPLAY menu item (see page
68) is set to ON (factory default setting), the
B−Y/
CPST (SUPER) connector outputs a composite video
signal with superimposed text information.
When S-VIDEO is selected:
When the CHARA. DISPLAY menu item (see page
68) is set to ON (factory default setting), the B
−Y/
CPST (SUPER) connector outputs a composite video
signal with superimposed text information.
When Y
–
R, B is selected:
b
bb
b AUDIO OUT 1/3 and AUDIO OUT 2/4 connectors
(XLR-3 pin, male)
These connectors output analog audio signals. The output
audio channels are determined by the playback audio mode
and the setting (1/2 CH or 3/4 CH) of the AUDIO
OUTPUT menu item (see page 75) as follows.
When in 2 CH (48 kHz or 44.1 kHz) mode:
When in 4 CH (32 kHz) mode:
The current playback audio mode is indicated by the PB Fs
display on the front panel.
c
cc
c MONITOR connector (RCA phono jack)
This connector outputs audio signals for monitoring. The
audio signals to be output from this connector can be
selected with the MONITOR SELECT button and
METER CH-1/2 3/4 button on the front panel.
1/3
2/4
VIDEO OUT
AUDIO OUT
MONITOR
Y/CPST R-Y/C/CPST
(SUPER)
B-Y/CPST
a VIDEO OUT connectors
b AUDIO OUT 1/3 and AUDIO OUT 2/4 connectors
c MONITOR connector
Connectors Output signals
Y/CPST Composite signal
R−Y/C/CPST Composite signal
B−Y/CPST
(SUPER)
Composite signal
Connectors Output signals
Y/CPST Y signal
R−Y/C/CPST C signal
(3.58 MHz for DSR-1500A/
4.43 MHz for DSR-1500AP)
B−Y/CPST
(SUPER)
Composite signal
Connectors Output signals
Y/CPST Y signal
R−Y/C/CPST R−Y signal
B−Y/CPST
(SUPER)
B−Y signal
Output
connectors
Output audio channels
AUDIO OUT 1/3 Audio channel 1 (when 1/2 CH is
selected) or silent (when 3/4 CH is
selected)
AUDIO OUT 2/4 Audio channel 2 (when 1/2 CH is
selected) or silent (when 3/4 CH is
selected)
Output
connectors
Output audio channels
AUDIO OUT 1/3 Audio channel 1 (when 1/2 CH is
selected) or audio channel 3 (when 3/
4 CH is selected)
AUDIO OUT 2/4 Audio channel 2 (when 1/2 CH is
selected) or audio channel 4 (when 3/
4 CH is selected)