Filter
Top Products
67
Menu Contents
Chapter 4 Menu Settings
AUTO EE SELECT [> Auto EE]:
Determine whether the unit
enters EE mode or PB mode
when audio and video
signals from other equipment
are input.
When this unit is used as the
recorder for cut editing, it is
possible to output the input
audio and video signals to
the monitor. This enables
editing operation to be
carried out using a single
monitor.
CASSETTE OUT [>>
Cass. out]: Operations
when the cassette has
been ejected
*EE [>>> EE]: Output video and audio signals received from
other equipment.
PB [>>> PB]: Mute video and audio signals.
F. FWD/REW [>> F. FWD/
REW]: Operations
when in fast forward or
rewind mode
EE [>>> EE]: Output video and audio signals received from
other equipment.
*PB [>>> PB]: The unit enters playback mode and outputs a
playback video signal. Audio signals are muted.
STOP [>> STOP]:
Operations when in
stop mode
EE [>>> EE]: Output video and audio signals received from
other equipment.
*PB [>>> PB]: The unit enters playback mode and outputs a
still picture.
STANDBY OFF [>> STBY
OFF]: Operations
when in standby off
mode
EE [>>> EE]: Output video and audio signals received from
other equipment.
*PB [>>> PB]: The unit enters playback mode and outputs a
still picture.
LOCAL ENABLE [> Local ENA]: Select which of the tape
transport control buttons (EJECT, REW, PLAY, F FWD,
STOP, and REC) operate when the LOCAL/REMOTE
switch is set to “REMOTE.”
ALL DISABLE [>> All DIS]: All of the tape transport control
buttons are disabled.
*STOP & EJECT [>> STOP&EJ]: Only the STOP and EJECT
buttons are enabled.
ALL ENABLE [>> All ENA]: All of the tape transport control
buttons are enabled, and settings such as preroll time
change or time data display selection are effective.
REC FORMAT [> REC FMT]: Select the recording format. *DVCAM [>> DVCAM]: DVCAM format
DV (SP) [>> DV (SP)]: DV (SP) format
REC INHIBIT [> REC INH]: Determine whether to prohibit
recording on tape.
*OFF [>> OFF]: Do not prohibit recording on tape.
ON [>> ON]: Prohibit recording on tape. (The REC INHI
indicator in the display section lights.)
SEARCH ENABLE [> Search ENA]: Select whether to enable
playback in shuttle/jog mode by the use of the arrow
(fFgG) buttons.
*DISABLE [>> DISABLE]: Do not enable.
ENABLE [>> ENABLE]: Enable.
MAX SRCH SPEED [> Max
SRCH]: Specify the
maximum tape speed in
search (shuttle) mode and F.
FWD (fast forward)/REW
(rewind) mode.
SHUTTLE [>> SHUTTLE]:
Specify the maximum
tape speed in search
(shuttle) mode.
X60 [>>> X60]: Maximum 60 times normal speed
*X32 [>>> X32]: Maximum 32 times normal speed
X16 [>>> X16]: Maximum 16 times normal speed
F. FWD/REW [>> F. FWD/
REW]: Specify the
maximum tape speed
in F. FWD/REW mode.
MAX [>>> MAX]: No maximum tape speed is specified.
*X85 [>>> X85]: Maximum 85 times normal speed
X60 [>>> X60]: Maximum 60 times normal speed
X32 [>>> X32]: Maximum 32 times normal speed
Note
When this item is set to MAX, the playback video signal is
muted.
PREROLL TIME [> Preroll]: Set the preroll time. 15 SEC [>> 15 sec] to 0 SEC [>> 0 sec]: The preroll time can
be set in one-second increments to between 0 and 15
seconds.
A preroll time of at least 5 seconds is recommended when
using this unit for editing. When an editing control unit such as
the PVE-500 has been connected, this setting is disabled and
the setting on the editing control unit is in effect. Operations
such as the preroll time setting and the time data switching
operation are also performed on the editing control unit.
Factory default setting: 5 SEC [>> 5 sec]
AFTER CUE-UP [> After CUE]: Select the operating mode
following cue-up.
*STOP [>> STOP]: Stop mode
STILL [>> STILL]: Output still pictures in search mode.
OPERATIONAL FUNCTION [Operational]: Operation
settings
Description of settings