Filter
Top Products
91
Connections for an A/B Roll Editing System
Chapter 5 Connections and Settings
Connections for an A/B Roll Editing System
The following is an example configuration of A/B roll
editing system using the DSR-1500A/1500AP.
In this configuration, two DSR-1500A/1500AP units are
used, one as the recorder and the other as player 1, and an
analog Betacam UVW-1600/1600P Videocassette Player
unit is used as player 2. To create a final tape (a tape that
contains a completely packaged program) in Betacam
format, use a Betacam VCR such as the UVW-1800/1800P
as the recorder.
Notes
• This application requires the DSR-1500A/1500AP unit
used as the recorder to be fitted with the optional DSBK-
1504/1504P board.
• The DSR-1500A/1500AP units shown in the following
figure are fitted with the optional DSBK-1501 and
DSBK-1504/1504P boards.
The purpose of the following figure is to indicate the flow
of signals among the component devices in the system.
The specific connections and settings are described
beginning on page 93.