Filter
Top Products
36 (GB) Chapter 2 Playback and Recording
Chapter 2 Playback and Recording
Playback
Notes
• The unit cannot detect a signal for Index search or an
unrecorded portion within 20 seconds of the
beginning of the playback.
•When you intend to turn the unit off, press the STOP
button on this unit to stop the tape transport operation
beforehand. If you turn the unit off while a tape is
running, for example, by using an AC timer, the unit
or the tape may be damaged.
• The editing software used on the digital non-linear
editing system may mark an index signal on a tape
itself. Therefore, if you use a tape on which signals
transmitted from a digital non-linear editing
controller are recorded or a copy tape made from one,
using digital dubbing, Auto Repeat may not be
performed correctly.
To stop Auto Repeat
Press the STOP button on this unit.
To release the Auto Repeat mode
Set the TIMER selector on the front panel to OFF.