Sony DSR-25 VCR User Manual


 
Chapter 2 Playback and Recording 41 (GB)
Chapter 2 Playback and Recording
If you use a cassette with cassette memory, the index
will also be marked in the cassette memory.
Notes
•You cannot mark a new index while the “INDEX
MARK” indicator is being displayed.
If you record on a portion of the tape where an index
has been marked, the index will be erased. You
cannot delete just an index while keeping the image
or sound.
•You cannot mark an index during playback,
duplicating or audio dubbing operations. The INDEX
button and the INDEX WRITE button are disabled in
these operations.
The cassette memory space available limits the
number of indexes that you can mark. When you use
a previously recorded tape for repeated recordings,
make more memory space available by erasing
unwanted items using ITEM ERASE or ERASE ALL
on the CM SET menu before you start recording.
To use an index during playback
You will need the Remote Commander or the Remote
Control Unit (DSRM-20, not supplied).
For details on the playback functions using the Remote
Commander, see “Searching using the search function” in
“Playback Functions” on page 33 (GB).
AC timer recording
By connecting this unit to an external AC timer (not
supplied), you can start recording at a preset time.
1 Connect this unit to an external AC timer (not
supplied).
2 Insert a tape for recording.
3 Set the INPUT SELECT selector of this unit to
select the input signal.
4 Set the TIMER selector on the front panel of this
unit to REC.
5 Set the timer-on time on the connected AC timer.
At the preset time, the power of this unit turns on
automatically and recording starts after a few
seconds (no more than 30). Set the timer allowing
a margin for the recording to start. You do not
need to press the REC button.
Note
When you intend to turn the unit off, press the STOP
button on this unit to stop the tape transport operation
beforehand.
If you turn the unit off while a tape is running, for
example, by using an AC timer, the unit or the tape
may be damaged.
If the tape ends before the recording source
stops operation
The tape stops.
To stop recording during timer recording
Press the STOP button on this unit.
To release the AC timer recording mode
Set the TIMER selector on the front panel of this unit
to OFF.
DSR-25 (rear panel)
VIDEO in INPUT
Recording
source
(external tuner,
etc.)
AC timer
to an AC outlet